{"title":"Stone Saws \u0026 Routers","description":"\u003cdiv class=\"OutlineElement Ltr SCXW183984189 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW183984189 BCX0\"\u003e\u003cspan data-contrast=\"none\" class=\"TextRun SCXW183984189 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW183984189 BCX0\"\u003eThis collection brings together the full range of cutting and routing equipment at Pro Tool Haus for stone and tile fabrication — from bridge saws and tile saws for primary slab cutting to stone routers for edge profiling, sink cutouts, and decorative shaping.\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"EOP SCXW183984189 BCX0\" data-ccp-props='{\"335559739\":100}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW183984189 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW183984189 BCX0\"\u003e\u003cspan data-contrast=\"none\" lang=\"EN-US\" class=\"TextRun SCXW183984189 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW183984189 BCX0\"\u003eStone routers accept router bits, finger bits, and profile wheels depending on the profile required — ogee, bullnose, bevel, eased edge, and more. Bridge saws are the centerpiece of any stone fabrication shop for full slab cutting. Tile saws serve tile installation contractors for\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW183984189 BCX0\"\u003eaccurate\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW183984189 BCX0\"\u003e\u003cspan\u003e \u003c\/span\u003efield cuts.\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"EOP SCXW183984189 BCX0\" data-ccp-props='{\"335559739\":100}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"OutlineElement Ltr SCXW183984189 BCX0\"\u003e\n\u003cp class=\"Paragraph SCXW183984189 BCX0\"\u003e\u003cspan data-contrast=\"none\" class=\"TextRun SCXW183984189 BCX0\"\u003e\u003cspan class=\"NormalTextRun SCXW183984189 BCX0\"\u003eBrowse by equipment type using the sub-collections: \u003ca href=\"\/collections\/bridge-saws\" title=\"Bridge Saws\"\u003eBridge Saws\u003c\/a\u003e, \u003ca href=\"\/collections\/tile-saws\" title=\"Tile Saws\"\u003eTile Saws\u003c\/a\u003e, \u003ca href=\"\/collections\/miter\/saws\" title=\"Miter Saws\"\u003eMiter Saws\u003c\/a\u003e, and \u003ca href=\"\/collections\/routers\" title=\"Routers\"\u003eRouters\u003c\/a\u003e for edge profiling work.\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"EOP SCXW183984189 BCX0\" data-ccp-props='{\"335559739\":0}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"proxxon-kgs-80-chop-miter-saw","title":"Proxxon Chop and Miter Saw KGS 80","description":"\u003cp\u003eThe Proxxon KGS 80 is a precision chop and miter saw for fine crosscutting and miter cuts on small workpieces in wood, plastic, non-ferrous metal and composite. Miter angles adjustable to 60° left and right.\u003c\/p\u003e","brand":"Proxxon","offers":[{"title":"Default Title","offer_id":50111627296992,"sku":"37160","price":284.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/37160_cdf61ad9-8bd3-4c90-bada-dd88a34d454c.jpg?v=1773687437"},{"product_id":"achilli-cms-portable-wet-cut-sliding-compound-miter-saw","title":"Achilli CMS Portable Wet Cut Sliding Compound Miter Saw — Marble \u0026 Soft Stone Precision Cutting","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BukCdVHgES4?si=CLFJhSZlSIXMmULR\" title=\"Achilli CMS Portable Wet Cut Sliding Compound Miter Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003ePortable Wet Cut Sliding Compound Miter Saw for Marble \u0026amp; Soft Stone\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli CMS\u003c\/strong\u003e is a portable bench-style wet cutting saw that brings compound miter saw geometry to stone fabrication. Straight cuts, bevel cuts, plunge cuts, and miter cuts in all directions — the swivelling head assembly rotates ±45° with positive locks at ±45°, ±22.5°, and 0° for repeatable accuracy without re-measuring between cuts.\u003c\/p\u003e\n\u003cp\u003eEngineered for marble and soft stone, the CMS handles the precision angle work that standard portable saws can't do cleanly. The removable ABS water tray with built-in recycling pump keeps the blade cool continuously — no external water supply, no mid-cut interruptions. Available in 230V (3 HP) and 115V (1.5 HP) configurations, covering both standard shop supply and North American site power.\u003c\/p\u003e\n\u003cp\u003eFolding legs, a long-side transport handle, and a compact bench-style footprint make it practical to move between locations and set up quickly wherever the work is.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eSwivelling Head ±45° with Positive Locks\u003c\/h3\u003e\n\u003cp\u003eThe head assembly swivels from ±45° to 0° with positive detent locks at ±45°, ±22.5°, and 0° — set the angle, lock it, and cut repeatedly without re-measuring. Consistent miter angles across every piece.\u003c\/p\u003e\n\u003ch3\u003eHead Tilt 90° to 45° for Bevel Cuts\u003c\/h3\u003e\n\u003cp\u003eManual head tilt from 90° to 45° for inclined cuts and compound angles — combine swivel and tilt for true compound miter cuts on marble and soft stone.\u003c\/p\u003e\n\u003ch3\u003eManual Plunge Mechanism\u003c\/h3\u003e\n\u003cp\u003ePrecise cutting depth adjustment via manual plunge — set depth accurately before each cut, adjust quickly between passes without tools.\u003c\/p\u003e\n\u003ch3\u003eRemovable ABS Water Tray with Sludge Separation\u003c\/h3\u003e\n\u003cp\u003eThe ABS tray channels water to separate sludge from the recycled supply — cleaner water recirculation, longer pump life, and easier cleanup. Removable for quick cleaning between jobs.\u003c\/p\u003e\n\u003ch3\u003e115V Configuration Available\u003c\/h3\u003e\n\u003cp\u003eThe 1.5 HP 115V configuration runs on standard North American household and site power — no 230V supply required. Practical for job-site use where 230V isn't available.\u003c\/p\u003e\n\u003ch3\u003eGalvanized Steel Frame with Folding Legs\u003c\/h3\u003e\n\u003cp\u003eCompact galvanized steel structure built for corrosion resistance in wet cutting environments. Folding legs and long-side transport handle make it practical to carry and set up solo.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003e230V Version\u003c\/th\u003e\n\u003cth\u003e115V Version\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP)\u003c\/td\u003e\n\u003ctd\u003e1.1 kW (1.5 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, single-phase, 50\/60 Hz\u003c\/td\u003e\n\u003ctd\u003e115V, single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2800 RPM (50 Hz) \/ 3400 RPM (60 Hz)\u003c\/td\u003e\n\u003ctd\u003e2800 \/ 3400 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e280 mm (11\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Swivel\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e±45° to 0° (locks at ±45°, ±22.5°, 0°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Tilt\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eRemovable ABS tray, sludge separation, recycling pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eGalvanized steel, folding legs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Weight\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e~220 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eMSCSMM01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMS – 1 Phase (230V, 3 HP)\u003c\/strong\u003e — standard shop configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMS – 1 Phase (115V, 1.5 HP)\u003c\/strong\u003e — North American site power configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Table (Add-On)\u003c\/strong\u003e — 1200 mm (4 ft) extension tables for larger slab support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eSoft natural stone\u003c\/li\u003e\n\u003cli\u003eLimestone and travertine\u003c\/li\u003e\n\u003cli\u003eOnyx\u003c\/li\u003e\n\u003cli\u003eSofter granite and engineered stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision miter cuts for stone countertop edges and cladding joints\u003c\/li\u003e\n\u003cli\u003eCompound angle cuts on marble and soft stone\u003c\/li\u003e\n\u003cli\u003eBevel cuts for decorative stone work\u003c\/li\u003e\n\u003cli\u003ePlunge cuts for sink cut-outs and openings\u003c\/li\u003e\n\u003cli\u003eRepeatable angle cuts using positive lock positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabricators specializing in marble and soft stone work\u003c\/li\u003e\n\u003cli\u003eShops needing compound miter capability without a full bridge saw\u003c\/li\u003e\n\u003cli\u003eInstallers performing precision miter cuts on-site\u003c\/li\u003e\n\u003cli\u003eFabricators who need both 230V and 115V power options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat makes the CMS different from a standard portable bench saw?\u003c\/h3\u003e\n\u003cp\u003eThe CMS is a sliding compound miter saw — the head swivels ±45° and tilts from 90° to 45°, enabling true compound miter cuts that a standard portable bench saw with fixed head geometry cannot produce. Positive locks at ±45°, ±22.5°, and 0° make repeatable angle cuts fast and accurate.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for granite as well as marble?\u003c\/h3\u003e\n\u003cp\u003eThe CMS is engineered primarily for marble and soft stone. It can handle softer granite and engineered stone, but for hard granite, quartzite, and sintered materials, a higher-power bridge saw is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the 230V and 115V versions?\u003c\/h3\u003e\n\u003cp\u003eThe 230V (3 HP) version is the standard shop configuration with full motor power. The 115V (1.5 HP) version runs on standard North American household and site power — practical for job-site use where 230V supply isn't available, with reduced motor power suited to marble and soft stone.\u003c\/p\u003e\n\u003ch3\u003eDoes it require an external water supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The removable ABS water tray with built-in recycling pump handles blade cooling without an external water connection.\u003c\/p\u003e\n\u003ch3\u003eWhat are the positive lock positions on the swivel?\u003c\/h3\u003e\n\u003cp\u003e±45°, ±22.5°, and 0° — the most common miter angles for stone fabrication work. Set the angle, engage the lock, and cut repeatedly without re-measuring.\u003c\/p\u003e\n\u003ch3\u003eCan I add extension tables for larger slabs?\u003c\/h3\u003e\n\u003cp\u003eYes. Side extension tables (1200 mm \/ 4 ft) are available as an add-on to support and stabilize larger slabs during cutting.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — high-capacity bridge-style miter saw for 45° stone cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — portable saw with profiling capability for marble and granite\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tag-portable-bench-saw\"\u003eAchilli TAG Portable Bench Saw\u003c\/a\u003e — heavy-duty portable bench saw for stone and tile\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router for stone finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"CMS – 1 Phase (230V, 3HP)","offer_id":51313764892896,"sku":"MSCSMM01","price":3124.21,"currency_code":"USD","in_stock":true},{"title":"CMS – 1 Phase (115V, 1.5HP)","offer_id":51313764925664,"sku":"MSCSMM04","price":3843.3,"currency_code":"USD","in_stock":true},{"title":"Side Extension Table (Add-On)","offer_id":51313764958432,"sku":"BAN580VFX01","price":318.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/MSCSMM01-3T.jpg?v=1775047853"},{"product_id":"gold-saw-4000-i-ts-b-4-1","title":"Achilli GOLD CNC Monoblock Bridge Saw — 4+1 Axis CNC Stone Cutting \u0026 Profiling Center","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fvumnQud_bY?si=7gF2fnwX6G0VkvZk\" title=\"Achilli GOLD CNC Monoblock Bridge Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003e4+1 Axis CNC Monoblock Bridge Saw for High-End Stone Fabrication\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli GOLD\u003c\/strong\u003e is a next-generation CNC monoblock bridge saw built for fabrication shops that need to move beyond manual cutting. Four fully CNC-controlled axes plus automatic head rotation from 0° to 360° give you automated straight cuts, angled cuts, profiling, sink cut-outs, drilling, and decorative edge work — all from a single machine, all programmable from a 12\" touchscreen interface.\u003c\/p\u003e\n\u003cp\u003eThe monoblock steel structure requires no foundation — position it, level it, and run. Hot-dip galvanized frame, brushless motors on all axes, and linear guides with recirculating ball slides are built for continuous industrial production, not occasional shop use. The hydraulic tilting worktable handles large, heavy slabs safely without manual lifting. At 11 kW (15 HP) with variable speed from 800 to 3000 RPM, it has the power to run 350–525 mm blades through granite, quartzite, and sintered stone at production throughput.\u003c\/p\u003e\n\u003cp\u003eFor shops ready to automate, the GOLD is the benchmark.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003e4+1 Axis CNC Control with 360° Head Rotation\u003c\/h3\u003e\n\u003cp\u003eFull CNC control across X, Y, Z, and tilt axes, plus automatic head rotation from 0° to 360°. Cuts any angle, any direction, without manual repositioning. Enables complex shapes, decorative profiles, and multi-axis cuts that are impossible on manual machines.\u003c\/p\u003e\n\u003ch3\u003e12\" Touchscreen Interface with Pre-Loaded Programs\u003c\/h3\u003e\n\u003cp\u003eIntuitive touchscreen programming with pre-loaded cutting programs for hexagons, octagons, kitchen tops, polygons, and custom shapes. Operators can run complex cutting cycles without CNC programming expertise — select the program, set the parameters, run the cycle.\u003c\/p\u003e\n\u003ch3\u003eBrushless Motors on All Axes\u003c\/h3\u003e\n\u003cp\u003eBrushless motors deliver smooth, precise, and reliable movement across all axes — lower maintenance than brushed motors, higher positional accuracy, and consistent performance over long production runs.\u003c\/p\u003e\n\u003ch3\u003eMonoblock Structure — No Foundation Required\u003c\/h3\u003e\n\u003cp\u003eThe monoblock steel frame ships as a single rigid unit. No foundation pour, no anchor bolts, no extended installation. Position, level, connect utilities, and run. Hot-dip galvanized finish for long-term corrosion resistance in wet shop environments.\u003c\/p\u003e\n\u003ch3\u003eHydraulic Tilting Worktable\u003c\/h3\u003e\n\u003cp\u003eThe 4800 × 2200 mm worktable tilts hydraulically for safe slab loading without manual lifting. WPC and rubber surface layer protects slab faces during processing. Pneumatic pop-up slab stops and pop-up rollers available for thin material handling and slab positioning.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Drilling \u0026amp; Advanced Processing\u003c\/h3\u003e\n\u003cp\u003e1\/2\" GAS connection for core drilling. Automatic drilling cycle for corner cutting and stress relief on sintered materials. Handles sink cut-outs, countertop fabrication, and precision detail work in the same automated cycle as straight cuts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Axes\u003c\/td\u003e\n\u003ctd\u003e4+1 (X, Y, Z, tilt + 360° head rotation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX-Axis Travel\u003c\/td\u003e\n\u003ctd\u003e3900 mm (12'8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eY-Axis Travel\u003c\/td\u003e\n\u003ctd\u003e2380 mm (7'8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ-Axis Travel\u003c\/td\u003e\n\u003ctd\u003e320 mm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable Size\u003c\/td\u003e\n\u003ctd\u003e4800 × 2200 mm (15'9\" × 7'2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e350–525 mm (14\"–20\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain Motor Power\u003c\/td\u003e\n\u003ctd\u003e11 kW (15 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable Speed\u003c\/td\u003e\n\u003ctd\u003e800–3000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Rotation\u003c\/td\u003e\n\u003ctd\u003e0° to 360° (automatic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Tilt\u003c\/td\u003e\n\u003ctd\u003e90° to 0° (CNC-controlled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003e12\" touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotors\u003c\/td\u003e\n\u003ctd\u003eBrushless, all axes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotion System\u003c\/td\u003e\n\u003ctd\u003eLinear guides with recirculating ball slides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructure\u003c\/td\u003e\n\u003ctd\u003eMonoblock steel, hot-dip galvanized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoundation\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling\u003c\/td\u003e\n\u003ctd\u003e1\/2\" GAS connection, automatic cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Weight\u003c\/td\u003e\n\u003ctd\u003e~4000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMMIHTPWZ28LHL-AHCHHE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — projects blade cutting line for improved accuracy and alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-Controlled Hydraulic Tilting Worktable\u003c\/strong\u003e — automated slab loading system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Pendant Control\u003c\/strong\u003e — remote operation for improved workflow flexibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic Pop-Up Slab Stops\u003c\/strong\u003e — safe handling of thin materials (0–80 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePop-Up Rollers\u003c\/strong\u003e — hydraulic system for slab positioning and movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Tables with Rollers (1510 × 865 mm)\u003c\/strong\u003e — expanded work surface for large slab handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eQuartzite\u003c\/li\u003e\n\u003cli\u003eSintered stone (Dekton, Neolith, etc.)\u003c\/li\u003e\n\u003cli\u003eCeramic and large-format porcelain panels\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomated straight and angled slab cutting\u003c\/li\u003e\n\u003cli\u003eSink cut-outs and countertop fabrication\u003c\/li\u003e\n\u003cli\u003eDecorative edge profiling and custom shapes\u003c\/li\u003e\n\u003cli\u003eHexagon, octagon, polygon, and custom geometric cuts\u003c\/li\u003e\n\u003cli\u003eCore drilling and corner stress relief on sintered materials\u003c\/li\u003e\n\u003cli\u003eHigh-volume production cutting in professional fabrication shops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-end stone fabrication shops ready to automate production\u003c\/li\u003e\n\u003cli\u003eOperations processing granite, quartzite, and sintered stone at volume\u003c\/li\u003e\n\u003cli\u003eShops needing CNC profiling, drilling, and cutting from a single machine\u003c\/li\u003e\n\u003cli\u003eFabricators moving from manual bridge saws to automated CNC production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does 4+1 axis mean on the GOLD?\u003c\/h3\u003e\n\u003cp\u003eFour fully CNC-controlled axes (X, Y, Z, and head tilt) plus automatic 360° head rotation as the fifth axis. This allows the machine to cut any angle, any direction, and execute complex multi-axis operations automatically without manual repositioning.\u003c\/p\u003e\n\u003ch3\u003eDoes it require a concrete foundation?\u003c\/h3\u003e\n\u003cp\u003eNo. The monoblock steel structure ships as a single rigid unit and requires no foundation pour or anchor bolts. Position, level, connect utilities, and run.\u003c\/p\u003e\n\u003ch3\u003eCan it handle sink cut-outs and drilling as well as straight cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The GOLD includes a 1\/2\" GAS drilling connection and automatic drilling cycle for corner cutting and stress relief. Sink cut-outs, countertop fabrication, and precision detail work run in the same automated cycle as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum blade size?\u003c\/h3\u003e\n\u003cp\u003e525 mm (20\") diameter blades. The variable speed range (800–3000 RPM) allows optimization for different blade sizes and materials.\u003c\/p\u003e\n\u003ch3\u003eHow complex is the programming?\u003c\/h3\u003e\n\u003cp\u003eThe 12\" touchscreen interface includes pre-loaded programs for common shapes (hexagons, octagons, kitchen tops, polygons). Operators can run complex cutting cycles without CNC programming expertise by selecting programs and setting parameters.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply does the GOLD require?\u003c\/h3\u003e\n\u003cp\u003eThe GOLD runs on 3-phase power at 11 kW (15 HP). Confirm your shop's electrical capacity and supply before ordering. Contact us for full installation requirements.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shops not yet ready for full CNC\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — dedicated 45° miter saw for stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-top-manual-working-center\"\u003eAchilli TOP Manual Working Center\u003c\/a\u003e — manual working center for countertop fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-sc500-slab-cart\"\u003eAchilli SC500 Slab Cart\u003c\/a\u003e — hydraulic slab cart for loading slabs onto the GOLD\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router for finishing work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003ePro Tool Haus — Certified Achilli Distributor\u003c\/h2\u003e\n\u003cp\u003ePro Tool Haus is a certified, factory-trained Achilli distributor. We carry the full Achilli lineup and provide expert guidance, installation support, and industry-experienced service for every machine we sell. \u003ca href=\"\/blogs\/news\/cnc-bridge-saws-for-stone-what-materials-can-they-cut\"\u003eLearn more about CNC bridge saws for stone fabrication.\u003c\/a\u003e\u003c\/p\u003e","brand":"Achilli","offers":[{"title":"Default Title","offer_id":51164336849120,"sku":"MMIHTPWZ28LHL-AHCHHE","price":153689.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/GOLD-5-assi-senza-sfondo_png.webp?v=1775047850"},{"product_id":"achilli-tag-portable-wet-bridge-saw","title":"Achilli TAG Portable Wet Bridge Saw — Professional Stone \u0026 Tile Saw for Job Site \u0026 Shop","description":"\u003ch2\u003eProfessional Portable Wet Bridge Saw for Stone, Tile \u0026amp; Construction Materials\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli TAG Portable Wet Bridge Saw\u003c\/strong\u003e is a multi-purpose portable bridge saw engineered for construction sites and fabrication shops. Built in Italy with top-grade materials, the TAG delivers smooth, accurate cuts across granite, marble, porcelain, ceramic, concrete, glass, and other sheet materials — with the double rhomboid beam rigidity that sets it apart from lighter portable saws.\u003c\/p\u003e\n\u003cp\u003eThe self-contained water recycling system feeds both sides of the blade continuously, keeping it cool and extending blade life without an external water supply. Folding legs, an integrated transport handle, and optional side extension tables make it practical to deploy on site or set up in the shop. Available in cut lengths from 600 mm to 2000 mm to match the scale of your work.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eDouble Rhomboid Beam for Rigidity \u0026amp; Accuracy\u003c\/h3\u003e\n\u003cp\u003eThe double rhomboid beam system provides structural rigidity and reduces vibration during cutting — consistent accuracy across dense stone materials even in demanding job-site conditions.\u003c\/p\u003e\n\u003ch3\u003eWet Cutting System — Both Sides of the Blade\u003c\/h3\u003e\n\u003cp\u003eThe self-contained water recycling tray with integrated pump feeds water to both sides of the blade simultaneously — more effective cooling than single-side systems, cleaner cuts, and longer blade life. No external water supply required.\u003c\/p\u003e\n\u003ch3\u003eManual Bridge Tilt 90° to 45°\u003c\/h3\u003e\n\u003cp\u003eFull tilt range for straight cuts, bevels, and miter work on tile and stone without a separate machine.\u003c\/p\u003e\n\u003ch3\u003eSoft Start On\/Off Switch\u003c\/h3\u003e\n\u003cp\u003eSwitch positioned near the blade housing for easy access during operation. Soft start reduces motor stress and blade shock on startup.\u003c\/p\u003e\n\u003ch3\u003eGalvanized Steel Rail Worktable with Squaring Bar\u003c\/h3\u003e\n\u003cp\u003eAdjustable squaring bar improves cut alignment and repeatability. Galvanized steel rails resist corrosion in continuous wet cutting use.\u003c\/p\u003e\n\u003ch3\u003eFolding Legs \u0026amp; Integrated Transport Handle\u003c\/h3\u003e\n\u003cp\u003eLegs fold flat for loading and transport. Integrated handle makes it practical to move and set up on site. Optional side extension tables mount on either side for larger slab support.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2 kW (2.7 HP) single-phase; 2.9 kW (4 HP) 3-phase optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Lengths\u003c\/td\u003e\n\u003ctd\u003e600 \/ 800 \/ 1000 \/ 1300 \/ 1500 \/ 2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Design\u003c\/td\u003e\n\u003ctd\u003eDouble rhomboid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual hand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd\u003eSelf-contained recycling tray, dual-side blade feed, integrated pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel rails with adjustable squaring bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e300 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShips From\u003c\/td\u003e\n\u003ctd\u003eCharlotte, NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eEC13MPLAL01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartzite and natural stone\u003c\/li\u003e\n\u003cli\u003ePorcelain and ceramic tile\u003c\/li\u003e\n\u003cli\u003eTerracotta\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eGlass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStraight slab cuts for countertops and cladding\u003c\/li\u003e\n\u003cli\u003eTile cutting for floor and wall installation\u003c\/li\u003e\n\u003cli\u003eBevel and miter cuts (45° tilt)\u003c\/li\u003e\n\u003cli\u003eOn-site cutting during stone and tile installation\u003c\/li\u003e\n\u003cli\u003eShop cutting across a wide range of stone and construction materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabricators needing a portable bridge saw for shop and site use\u003c\/li\u003e\n\u003cli\u003eTile and stone installers cutting on location\u003c\/li\u003e\n\u003cli\u003eContractors working across granite, marble, porcelain, and ceramic\u003c\/li\u003e\n\u003cli\u003eProfessionals who need a robust portable saw with wet cutting capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the TAG Wet Bridge Saw differ from the TAG Portable Bench Saw?\u003c\/h3\u003e\n\u003cp\u003eBoth use the double rhomboid beam and share the same cut length range. The Wet Bridge Saw features a dual-side blade water feed system for more effective cooling, and is positioned as the professional wet cutting configuration of the TAG line.\u003c\/p\u003e\n\u003ch3\u003eDoes it require an external water supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The self-contained water recycling tray with integrated pump handles blade cooling without an external water connection.\u003c\/p\u003e\n\u003ch3\u003eCan it make bevel and miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts from 90° to 45° for bevel and miter work on tile and stone.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does it accept?\u003c\/h3\u003e\n\u003cp\u003e250 to 350 mm (10\" to 14\") with a 25.4 mm (1\") bore.\u003c\/p\u003e\n\u003ch3\u003eWhere does it ship from?\u003c\/h3\u003e\n\u003cp\u003eShips from Charlotte, NC. Contact us for lead times and availability.\u003c\/p\u003e\n\u003ch3\u003eIs Pro Tool Haus an authorized Achilli dealer?\u003c\/h3\u003e\n\u003cp\u003eYes. Pro Tool Haus is a certified, factory-trained Achilli distributor. We carry the full Achilli lineup and provide expert guidance, fast fulfillment, and industry-experienced support.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tag-portable-bench-saw\"\u003eAchilli TAG Portable Bench Saw\u003c\/a\u003e — standard TAG bench saw configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-ams-portable-bench-saw\"\u003eAchilli AMS Portable Bench Saw\u003c\/a\u003e — compact portable bench saw for tile and stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — dedicated 45° miter saw for stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-gold-cnc-monoblock-bridge-saw\"\u003eAchilli GOLD CNC Monoblock Bridge Saw\u003c\/a\u003e — step up to full CNC automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003ePro Tool Haus — Certified Achilli Distributor\u003c\/h2\u003e\n\u003cp\u003eWhen you buy from Pro Tool Haus, you're ordering from a certified, factory-trained Achilli distributor. We carry the full lineup and stand behind every product with expert guidance, fast fulfillment, and support from people who work in the stone industry every day.\u003c\/p\u003e","brand":"Achilli","offers":[{"title":"Default Title","offer_id":51164337471712,"sku":"EC13MPLAL01","price":2804.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/TAG2-rid.jpg?v=1774356611"},{"product_id":"weha-rock-dog-router-single-speed-with-aquaplaning-base","title":"Weha Rock Dog Router Single Speed with Aquaplaning Base — 2.4 HP, 9,000 RPM, 220V Stone Profiling Machine","description":"\u003cp\u003eHigh-output stone profiling for demanding fabrication shops. The \u003cstrong\u003eWeha Rock Dog Router Single Speed\u003c\/strong\u003e is a 9,000 RPM profiling machine engineered to handle granite, marble, quartz, quartzite, and other stone materials with power and precision. Its 2.4 HP 220V single-phase motor profiles material up to 6cm thick, while the unibody aircraft-grade aluminum housing delivers superior strength and vibration control for stable, long-term operation.\u003c\/p\u003e\n\n\u003cp\u003eThe Aquaplaning Base System glides smoothly across the slab surface, reducing friction and improving operator control. The stainless steel 22mm shaft with 10mm thread accommodates most standard router bits on the market.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation speed:\u003c\/strong\u003e 9,000 RPM (single speed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.4 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 230V \/ 60Hz \/ Single Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 22mm with 10mm thread (stainless steel spindle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise \u0026amp; fall adjustment:\u003c\/strong\u003e 1.18\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax material thickness:\u003c\/strong\u003e 6cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Unibody aircraft aluminum housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase system:\u003c\/strong\u003e Aquaplaning Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater connection:\u003c\/strong\u003e Quick disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Thermal overload cut-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 22\" L x 13.7\" W x 15\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 77 lbs (100 lbs shipping in wood crate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 20 ft, 12 AWG with ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAquaplaning Base System\u003c\/h2\u003e\n\u003cp\u003eThe Aquaplaning Base allows the Rock Dog to glide smoothly across the slab surface with minimal friction, improving operator control and reducing fatigue during extended profiling runs. Particularly effective on large slabs and continuous edge work.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty \u0026amp; Service\u003c\/h2\u003e\n\u003cp\u003e12-month manufacturer warranty. Weha provides troubleshooting support and supplies replacement parts for in-shop repair, or can arrange service through their Charlotte, NC headquarters.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4 HP single-speed motor\u003c\/strong\u003e — consistent 9,000 RPM output for heavy-duty profiling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAquaplaning base\u003c\/strong\u003e — smooth, controlled movement across slab surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22mm \/ 10mm thread shaft\u003c\/strong\u003e — compatible with most standard stone router bits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6cm max material thickness\u003c\/strong\u003e — handles standard and mitered countertop profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnibody aircraft aluminum\u003c\/strong\u003e — superior strength and vibration damping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-disconnect water system\u003c\/strong\u003e — fast setup for wet profiling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal overload protection\u003c\/strong\u003e — automatic safety cut-out prevents motor damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWorks Well With\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weha-vacuum-brazed-zero-tolerance-wheel-no-bearing-5-8-11-thread\"\u003eWeha Vacuum Brazed Zero Tolerance Wheel\u003c\/a\u003e — zero-tolerance edge wheel for precise profiling on the Rock Dog\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weha-radial-arm-finger-tip-20-x-23-x-m12\"\u003eWeha Radial Arm Finger Tip (20 x 23 x M12)\u003c\/a\u003e — finger tip for radial arm profiling applications\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weha-radial-arm-finger-tip-1-2-gas-x-12mm-thread\"\u003eWeha Radial Arm Finger Tip (1\/2 Gas x 12mm Thread)\u003c\/a\u003e — alternative finger tip thread configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weha-frankfurt-button-diamond-shoe\"\u003eWeha Frankfurt Button Diamond Shoe\u003c\/a\u003e — diamond shoe for edge finishing and profiling\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/weha-pig-planetary-polisher-350-vs-with-donkey-package\"\u003eWeha Pig 350VS Planetary Polisher\u003c\/a\u003e — follow edge profiling with full surface polish restoration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/tenax-t-tape-miter-tape\"\u003eTenax T Tape Miter Tape\u003c\/a\u003e — mask and protect surfaces during profiling and miter work\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Weha","offers":[{"title":"Default Title","offer_id":51164348645600,"sku":"9000","price":3448.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/9000RockDogRouter2.jpg?v=1774356851"},{"product_id":"achilli-alu-plus-portable-bench-saw","title":"Achilli ALU PLUS Portable Bench Saw — Aluminum Frame Tile \u0026 Stone Saw for Job Sites","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BdPnQPQcYOM?si=kcCb0vHTLirgb_XT\" title=\"Achilli ALU PLUS Portable Bench Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003eAluminum Frame Portable Bench Saw for Tile, Stone \u0026amp; Construction Materials\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli ALU PLUS\u003c\/strong\u003e is a portable bench saw built around a high-strength extruded aluminum frame — lighter than steel-frame alternatives without sacrificing rigidity. A reinforced 100 × 60 mm pickled steel beam adds structural stability where it matters most, giving you a saw that's genuinely portable and genuinely precise.\u003c\/p\u003e\n\u003cp\u003eAvailable in three cut length configurations — ALU 80 (600–800 mm), ALU 130 (up to 1300 mm), and ALU 200 (up to 2000 mm with handwheel) — the ALU PLUS scales to the job. Manual bridge tilt from 90° to 45° handles bevel and miter work. The removable ABS water tank with built-in recycling pump keeps the blade cool without an external water supply. Side handles and folding legs make it practical to carry and set up solo on site.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eHigh-Strength Extruded Aluminum Frame\u003c\/h3\u003e\n\u003cp\u003eThe aluminum frame delivers excellent torsional rigidity at lower weight than steel — easier to transport between locations without the structural compromise that plagues cheaper lightweight saws. The reinforced 100 × 60 mm steel beam adds backbone where cutting forces are highest.\u003c\/p\u003e\n\u003ch3\u003eThree Cut Length Configurations — Up to 2000 mm\u003c\/h3\u003e\n\u003cp\u003eALU 80 covers 600–800 mm for tile work; ALU 130 extends to 1300 mm for stone and slab cuts; ALU 200 reaches 2000 mm with handwheel longitudinal feed for full countertop-length cuts.\u003c\/p\u003e\n\u003ch3\u003eBridge Tilt 90° to 45°\u003c\/h3\u003e\n\u003cp\u003eFull tilt range for straight cuts, bevels, and miter work on tile and stone without a separate machine.\u003c\/p\u003e\n\u003ch3\u003ePlunge Cutting Mechanism\u003c\/h3\u003e\n\u003cp\u003eAccurate depth adjustment via plunge mechanism — set cut depth precisely before each pass, adjust quickly between cuts.\u003c\/p\u003e\n\u003ch3\u003eRemovable ABS Water Tank with Recycling Pump\u003c\/h3\u003e\n\u003cp\u003eImpact- and wear-resistant ABS tank with a sludge separation area and built-in recycling pump. Removable for easy cleaning. No external water supply required on site.\u003c\/p\u003e\n\u003ch3\u003eSide Handles \u0026amp; Folding Legs\u003c\/h3\u003e\n\u003cp\u003eSide handles and folding legs make the ALU PLUS practical to carry, load, and set up solo. Designed for mobility across job sites without sacrificing stability during cutting.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP), single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2800 RPM (50 Hz) \/ 3400 RPM (60 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Lengths\u003c\/td\u003e\n\u003ctd\u003e600–800 \/ up to 1300 \/ up to 2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eHigh-strength extruded aluminum + 100×60 mm steel beam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Tank\u003c\/td\u003e\n\u003ctd\u003eRemovable ABS with sludge separation, recycling pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel rails with service square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eEL08MPL11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eALU 80 – 1 Phase (230V, 3 HP)\u003c\/strong\u003e — compact configuration, 600–800 mm cut range, ideal for tile work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALU 130 – 1 Phase (230V, 3 HP)\u003c\/strong\u003e — mid-range configuration, up to 1300 mm cut length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eALU 200 – 1 Phase (230V, 3 HP) + Handwheel\u003c\/strong\u003e — full-length configuration, up to 2000 mm with handwheel longitudinal feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Table (Add-On)\u003c\/strong\u003e — additional slab support for larger material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — head-mounted, projects blade cutting line for improved accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Table (500 × 430 mm)\u003c\/strong\u003e — compact extension for easier slab handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransportation Wheels\u003c\/strong\u003e — attach to legs for shop floor mobility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandwheel\u003c\/strong\u003e — crank for longitudinal feed (included with ALU 200)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic and porcelain tile\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eNatural stone\u003c\/li\u003e\n\u003cli\u003eBrick and masonry\u003c\/li\u003e\n\u003cli\u003eGeneral construction materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile cutting for floor and wall installation\u003c\/li\u003e\n\u003cli\u003eStone slab straight cuts up to 2000 mm\u003c\/li\u003e\n\u003cli\u003eBevel and miter cuts on tile and stone\u003c\/li\u003e\n\u003cli\u003eOn-site cutting during stone and tile installation\u003c\/li\u003e\n\u003cli\u003eConstruction site material cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile and stone installers who need a lightweight but rigid portable saw\u003c\/li\u003e\n\u003cli\u003eContractors moving between multiple job sites who need easy transport\u003c\/li\u003e\n\u003cli\u003eProfessionals needing single-phase 230V compatibility on site\u003c\/li\u003e\n\u003cli\u003eShops needing a compact, versatile bench saw for tile and stone work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the ALU 80, ALU 130, and ALU 200?\u003c\/h3\u003e\n\u003cp\u003eThe ALU 80 covers 600–800 mm cuts — best for tile installation work. The ALU 130 extends to 1300 mm for stone and slab cuts. The ALU 200 reaches 2000 mm with a handwheel for longitudinal feed, covering full countertop-length cuts.\u003c\/p\u003e\n\u003ch3\u003eHow does the aluminum frame compare to steel-frame saws?\u003c\/h3\u003e\n\u003cp\u003eThe extruded aluminum frame is lighter than steel, making the ALU PLUS easier to transport between sites. The reinforced 100 × 60 mm steel beam maintains structural rigidity where cutting forces are highest, so you don't sacrifice precision for portability.\u003c\/p\u003e\n\u003ch3\u003eDoes it require an external water supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The removable ABS water tank has a built-in recycling pump — no external water connection required on site.\u003c\/p\u003e\n\u003ch3\u003eCan it make bevel and miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts from 90° to 45° for bevel and miter work on tile and stone.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does it accept?\u003c\/h3\u003e\n\u003cp\u003e250 to 350 mm (10\" to 14\") with a 25.4 mm (1\") bore.\u003c\/p\u003e\n\u003ch3\u003eIs the water tank easy to clean?\u003c\/h3\u003e\n\u003cp\u003eYes. The ABS tank is removable and includes a sludge separation area — designed specifically for easy cleaning after use.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tag-portable-bench-saw\"\u003eAchilli TAG Portable Bench Saw\u003c\/a\u003e — heavy-duty portable bench saw with double rhomboid beam\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-ams-portable-bench-saw\"\u003eAchilli AMS Portable Bench Saw\u003c\/a\u003e — portable bench saw for tile and stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — portable saw with profiling capability\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — track-guided portable saw for on-site straight cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"ALU 80 – 1 Phase (230V, 3HP)","offer_id":51313764991200,"sku":"EL08MPL11","price":2170.88,"currency_code":"USD","in_stock":true},{"title":"ALU 130 – 1 Phase (230V, 3HP)","offer_id":51313765023968,"sku":"EL13MPL11","price":2519.52,"currency_code":"USD","in_stock":true},{"title":"ALU 200 – 1 Phase (230V, 3HP) + Handwheel","offer_id":51313765056736,"sku":"EL20MPL16","price":3276.74,"currency_code":"USD","in_stock":true},{"title":"Side Extension Table (Add-On)","offer_id":51313765089504,"sku":"BAN350VFP01","price":157.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/ALU-PLUS-sito-sfondo-1_jpg.webp?v=1775047855"},{"product_id":"achilli-tag-portable-bench-saw","title":"Achilli TAG Portable Bench Saw — Sliding Head Stone \u0026 Tile Saw for Job Site Use","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kK_lOD4p0gM?si=lGPD9Uv4ZmnPmdZj\" title=\"Achilli TAG Portable Bench Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003ePortable Bench Saw with Sliding Head for Stone, Tile \u0026amp; Construction Materials\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli TAG\u003c\/strong\u003e is a heavy-duty portable bench saw built for cutting tiles, stone slabs, and construction materials on demanding job sites. The double rhomboid beam design sets it apart from standard portable saws — it adds rigidity and reduces vibration at the source, so cuts stay accurate even on rough site conditions where a lighter saw would chatter.\u003c\/p\u003e\n\u003cp\u003eThe sliding head travels smoothly across useful cut lengths from 600 mm to 2000 mm, with manual bridge tilt from 90° to 45° for bevel and miter work. Available in TAG 200 (standard) and TAG 130 with aluminum tray configurations, both running on 230V single-phase. A self-contained water recycling tray with integrated pump handles blade cooling without an external water supply.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eDouble Rhomboid Beam for Enhanced Rigidity\u003c\/h3\u003e\n\u003cp\u003eThe double rhomboid beam system is the structural differentiator on the TAG — it increases frame rigidity, reduces vibration during cutting, and maintains consistent accuracy over time in demanding site environments where standard portable saws lose precision.\u003c\/p\u003e\n\u003ch3\u003eSliding Head — 600 mm to 2000 mm Cut Length\u003c\/h3\u003e\n\u003cp\u003eSix cut length options cover tile-size pieces through full countertop slab cuts. The sliding head feeds smoothly across the full range without binding or inconsistent pressure.\u003c\/p\u003e\n\u003ch3\u003eBridge Tilt 90° to 45°\u003c\/h3\u003e\n\u003cp\u003eFull tilt range for straight cuts, bevels, and miter work on tile and stone — no separate machine required for angled cuts.\u003c\/p\u003e\n\u003ch3\u003eHand Wheel Depth Control\u003c\/h3\u003e\n\u003cp\u003ePrecise cutting depth adjustment via hand wheel — set depth accurately before each cut, adjust quickly between passes.\u003c\/p\u003e\n\u003ch3\u003eGalvanized Steel Rail Worktable with Service Square\u003c\/h3\u003e\n\u003cp\u003eIntegrated service square improves cut alignment and repeatability. Galvanized steel rails resist corrosion in continuous wet cutting use.\u003c\/p\u003e\n\u003ch3\u003eSelf-Contained Water Recycling Tray\u003c\/h3\u003e\n\u003cp\u003eIntegrated pump recirculates water for continuous blade cooling — no external water supply needed on site. Cleaner cuts, longer blade life, less setup time.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2 kW (2.7 HP) standard; 2.9 kW (4 HP) 3-phase optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 50 Hz (single-phase standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Lengths\u003c\/td\u003e\n\u003ctd\u003e600 \/ 800 \/ 1000 \/ 1300 \/ 1500 \/ 2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Design\u003c\/td\u003e\n\u003ctd\u003eDouble rhomboid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Adjustment\u003c\/td\u003e\n\u003ctd\u003eHand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel rails with service square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd\u003eSelf-contained recycling tray with integrated pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eEC20MPL01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAG 200 – 1 Phase (230V, 3 HP)\u003c\/strong\u003e — standard configuration, 2000 mm max cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAG 130 – 1 Phase (230V, 3 HP) + Aluminum Tray\u003c\/strong\u003e — compact configuration with aluminum water tray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Table (Add-On)\u003c\/strong\u003e — additional slab support for larger material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — head-mounted, projects blade cutting line for improved accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Tables with Rollers (1000 × 458 mm)\u003c\/strong\u003e — smooth slab movement during cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Tables with Side Stop\u003c\/strong\u003e — additional slab support for faster, more precise processing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Table (500 × 430 mm)\u003c\/strong\u003e — compact extension for easier slab handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Water Tank\u003c\/strong\u003e — painted and galvanized for maximum rust resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransportation Wheels\u003c\/strong\u003e — attach to legs for shop floor mobility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic and porcelain tile\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs\u003c\/li\u003e\n\u003cli\u003eBrick and masonry\u003c\/li\u003e\n\u003cli\u003eGeneral construction materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile cutting for floor and wall installation\u003c\/li\u003e\n\u003cli\u003eStone slab straight cuts up to 2000 mm\u003c\/li\u003e\n\u003cli\u003eBevel and miter cuts on tile and stone\u003c\/li\u003e\n\u003cli\u003eOn-site cutting during stone and tile installation\u003c\/li\u003e\n\u003cli\u003eConstruction site material cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile and stone installers needing a robust portable saw for job-site cuts\u003c\/li\u003e\n\u003cli\u003eContractors cutting a wide range of construction materials on location\u003c\/li\u003e\n\u003cli\u003eFabricators needing a portable saw with longer cut capacity (up to 2000 mm)\u003c\/li\u003e\n\u003cli\u003eProfessionals who need single-phase power compatibility on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat makes the TAG different from the AMS?\u003c\/h3\u003e\n\u003cp\u003eThe TAG features a double rhomboid beam design that adds structural rigidity and reduces vibration compared to a standard beam — it's built for heavier site use and longer cut lengths (up to 2000 mm vs. 1300 mm on the AMS). The TAG is the more robust option for demanding environments.\u003c\/p\u003e\n\u003ch3\u003eDoes it require an external water supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The TAG has a self-contained water recycling tray with an integrated pump — no external water connection required on site.\u003c\/p\u003e\n\u003ch3\u003eCan it make bevel and miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts from 90° to 45° for bevel and miter work on tile and stone.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum cut length?\u003c\/h3\u003e\n\u003cp\u003e2000 mm (6'6\") on the TAG 200 configuration.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does it accept?\u003c\/h3\u003e\n\u003cp\u003e250 to 350 mm (10\" to 14\") with a 25.4 mm (1\") bore.\u003c\/p\u003e\n\u003ch3\u003eIs a 3-phase motor available?\u003c\/h3\u003e\n\u003cp\u003eYes — a 2.9 kW (4 HP) 3-phase motor is available as an option for higher power requirements.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-ams-portable-bench-saw\"\u003eAchilli AMS Portable Bench Saw\u003c\/a\u003e — compact portable bench saw for tile and stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-alu-plus-portable-bench-saw\"\u003eAchilli ALU PLUS Portable Bench Saw\u003c\/a\u003e — lightweight aluminum-frame portable bench saw\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — portable saw with profiling capability\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — track-guided portable saw for on-site straight cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"TAG 200 – 1 Phase (230V, 3HP)","offer_id":51313765122272,"sku":"EC20MPL01","price":4227.72,"currency_code":"USD","in_stock":true},{"title":"TAG 130 – 1 Phase (230V, 3HP) + Aluminum Tray","offer_id":51313765155040,"sku":"EC13MPLAL01","price":2804.07,"currency_code":"USD","in_stock":true},{"title":"Side Extension Table (Add-On)","offer_id":51313765187808,"sku":"BAN350VFP01","price":147.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/TAG2-sito.png?v=1775047858"},{"product_id":"achilli-ams-portable-bench-saw","title":"Achilli AMS Portable Bench Saw — Tile, Stone \u0026 Marble Cutting for Job Site \u0026 Shop","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Mx-m4hO5koo?si=6_j0ksDLI5nYRuZo\" title=\"Achilli AMS Portable Bench Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003ePortable Bench Saw for Tile, Stone \u0026amp; Marble — Job Site \u0026amp; Shop\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli AMS\u003c\/strong\u003e is a portable bench saw built for cutting bricks, natural stone, marble, granite, and ceramic tiles in job-site and shop environments. A sliding head system delivers smooth, controlled cuts across useful lengths from 600 mm to 1300 mm, while the manual bridge tilt from 90° to 45° handles bevel and miter work without a separate machine.\u003c\/p\u003e\n\u003cp\u003eAvailable in standard (AMS 130) and high-performance HT (AMS 200 HT) configurations, with single-phase and 3-phase motor options, the AMS covers everything from tile installation cuts to heavier stone fabrication work. Folding legs, an integrated transport handle, and a self-contained water recycling tray make it practical to move between locations and set up quickly on site.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eSliding Head System for Smooth, Controlled Cuts\u003c\/h3\u003e\n\u003cp\u003eThe sliding head travels smoothly across the full cut length — consistent feed speed, no binding, clean cut edges on tile, marble, and stone.\u003c\/p\u003e\n\u003ch3\u003eBridge Tilt 90° to 45° for Bevel Cuts\u003c\/h3\u003e\n\u003cp\u003eFull tilt range for straight cuts, bevels, and miter work. No separate machine needed for angled cuts on tile or stone.\u003c\/p\u003e\n\u003ch3\u003ePlunge Cutting Mechanism\u003c\/h3\u003e\n\u003cp\u003ePrecise depth adjustment via plunge mechanism — set the cut depth accurately before each pass without guesswork.\u003c\/p\u003e\n\u003ch3\u003eGalvanized Steel Rail Worktable with Squaring Bar\u003c\/h3\u003e\n\u003cp\u003eIntegrated adjustable squaring bar improves cut accuracy and repeatability. Available in 650 mm (25.5\") or 530 mm (21\") widths to match your material handling needs.\u003c\/p\u003e\n\u003ch3\u003eSelf-Contained Water Recycling Tray\u003c\/h3\u003e\n\u003cp\u003eIntegrated pump recirculates water for continuous blade cooling — no external water supply required on site. Cleaner cuts and longer blade life.\u003c\/p\u003e\n\u003ch3\u003eFolding Legs with Transport Handle\u003c\/h3\u003e\n\u003cp\u003eLegs fold flat for loading and transport. Integrated handle makes it practical to carry and set up solo on a job site.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eStandard (AMS 130)\u003c\/th\u003e\n\u003cth\u003eHT Version (AMS 200 HT)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2 kW (2.7 HP) standard; 2.2 kW (3 HP) or 2.9 kW (4 HP) optional\u003c\/td\u003e\n\u003ctd\u003e3.6 kW (5 HP) 3-phase; 2.2 kW (3 HP) 1-phase optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 50 Hz\u003c\/td\u003e\n\u003ctd\u003e400V, 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003ctd\u003e400–500 mm (16\"–20\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Lengths\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e600 \/ 800 \/ 1000 \/ 1300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable Width\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e650 mm (25.5\") or 530 mm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSelf-contained recycling tray with integrated pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eEI13MPL01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMS 130 – 1 Phase (230V, 3 HP)\u003c\/strong\u003e — standard single-phase configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAMS 200 HT – High Power (230V, 3 HP)\u003c\/strong\u003e — high-performance configuration for larger blades and heavier material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Table (Add-On)\u003c\/strong\u003e — additional slab support for larger material handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — projects blade cutting line for improved alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Table\u003c\/strong\u003e — additional support for larger materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransportation Wheels\u003c\/strong\u003e — attach to legs for shop floor mobility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHT Version Upgrade\u003c\/strong\u003e — high-performance configuration for larger blades and increased power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic and porcelain tile\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eNatural stone\u003c\/li\u003e\n\u003cli\u003eBrick and masonry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile cutting for floor and wall installation\u003c\/li\u003e\n\u003cli\u003eMarble and granite slab cutting\u003c\/li\u003e\n\u003cli\u003eBevel and miter cuts on tile and stone\u003c\/li\u003e\n\u003cli\u003eOn-site cutting during stone and tile installation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty stone cutting (HT version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTile installers needing a portable saw for job-site cuts\u003c\/li\u003e\n\u003cli\u003eStone fabricators requiring a compact bench saw for shop or site use\u003c\/li\u003e\n\u003cli\u003eContractors cutting brick, stone, and tile on location\u003c\/li\u003e\n\u003cli\u003eProfessionals needing single-phase power compatibility on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the AMS 130 and AMS 200 HT?\u003c\/h3\u003e\n\u003cp\u003eThe AMS 130 is the standard single-phase configuration with blades up to 350 mm. The AMS 200 HT is the high-performance version supporting larger blades (400–500 mm) and higher motor power for heavier stone cutting applications.\u003c\/p\u003e\n\u003ch3\u003eDoes it require an external water supply?\u003c\/h3\u003e\n\u003cp\u003eNo. The AMS has a self-contained water recycling tray with an integrated pump — no external water connection required on site.\u003c\/p\u003e\n\u003ch3\u003eCan it make bevel and miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts from 90° to 45° for bevel and miter work on tile and stone.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does it accept?\u003c\/h3\u003e\n\u003cp\u003eStandard: 250–350 mm (10\"–14\"). HT version: 400–500 mm (16\"–20\"). All with 25.4 mm (1\") bore.\u003c\/p\u003e\n\u003ch3\u003eHow portable is it for job-site use?\u003c\/h3\u003e\n\u003cp\u003eThe legs fold flat, and an integrated transport handle makes it practical to carry and set up solo. Optional transportation wheels attach to the legs for shop floor mobility.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply does it require?\u003c\/h3\u003e\n\u003cp\u003eThe AMS 130 runs on 230V single-phase — standard site power. The AMS 200 HT standard configuration runs on 400V 3-phase; a 230V single-phase motor option is also available for the HT version.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — portable saw with profiling capability for marble and granite\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tag-portable-bench-saw\"\u003eAchilli TAG Portable Bench Saw\u003c\/a\u003e — portable bench saw for stone and tile\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — track-guided portable saw for on-site straight cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"AMS 130 – 1 Phase (230V, 3HP)","offer_id":51313765220576,"sku":"EI13MPL01","price":3410.21,"currency_code":"USD","in_stock":true},{"title":"AMS 200 HT – High Power (230V, 3HP)","offer_id":51313765253344,"sku":"EI20MPL01","price":4044.86,"currency_code":"USD","in_stock":true},{"title":"Side Extension Table (Add-On)","offer_id":51313765286112,"sku":"BAN350VFP01","price":157.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/AMS-sito.png?v=1775047863"},{"product_id":"achilli-anr-portable-stone-saw","title":"Achilli ANR Portable Stone Saw — Cutting \u0026 Profiling Machine for Marble, Granite \u0026 Stone","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rMWuJQ7_2iI?si=bMo3Nx9FqUxmMhzw\" title=\"Achilli ANR Portable Stone Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003ePortable Cutting \u0026amp; Profiling Machine for Marble, Granite \u0026amp; Stone\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli ANR\u003c\/strong\u003e is a portable stone saw built for precision cutting and profiling of marble, granite, and stone slabs in both shop and job-site environments. With useful cut lengths from 600 mm to 2000 mm, bridge tilt from 90° to 45°, and an optional slot profiling device for edge work, it covers more operations than a standard portable saw — without the footprint of a full bridge saw.\u003c\/p\u003e\n\u003cp\u003eAvailable in two standard configurations — ANR 130 (single table) and ANR 200 (two tables) — and in a high-thickness HT version for larger blades and heavier material, the ANR scales to the demands of your work. Folding legs make it practical to transport between shop and site. The integrated water tank with recycling pump keeps the blade cool and the cut clean without a separate water supply setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eCutting Lengths from 600 mm to 2000 mm\u003c\/h3\u003e\n\u003cp\u003eSix useful cut length options — 600, 800, 1000, 1300, 1500, and 2000 mm — cover everything from tile-size pieces to full countertop slab cuts in a single portable machine.\u003c\/p\u003e\n\u003ch3\u003eBridge Tilt 90° to 45° for Bevel Cuts\u003c\/h3\u003e\n\u003cp\u003eFull tilt range handles straight cuts, bevels, and miter work without a separate machine. Adjust the bridge angle and cut — no reconfiguration required.\u003c\/p\u003e\n\u003ch3\u003eOptional Slot Profiling Device\u003c\/h3\u003e\n\u003cp\u003eConverts the ANR into a profiling machine — horizontal cutting, slotting, and edge profiling with shaped wheels. Expands the machine's application range significantly beyond straight cuts.\u003c\/p\u003e\n\u003ch3\u003eHT High-Thickness Version\u003c\/h3\u003e\n\u003cp\u003eAccepts 400–500 mm (16\"–20\") blades with a 3.7 kW (5 HP) 3-phase motor for cutting thick slabs and demanding materials that the standard configuration can't handle.\u003c\/p\u003e\n\u003ch3\u003eGalvanized Steel Rail Worktable with Service Square\u003c\/h3\u003e\n\u003cp\u003eIntegrated service square improves alignment and cut precision. Galvanized steel rails resist corrosion in wet cutting environments.\u003c\/p\u003e\n\u003ch3\u003eFolding Legs for Transport\u003c\/h3\u003e\n\u003cp\u003eLegs fold flat for easy loading and transport between shop and job site. Optional transportation wheels attach to the legs for mobility around the shop floor.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eStandard Version\u003c\/th\u003e\n\u003cth\u003eHT Version\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP) 1-phase \/ 3 kW (4 HP) 3-phase\u003c\/td\u003e\n\u003ctd\u003e3.7 kW (5 HP), 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V or 400V, 50\/60 Hz\u003c\/td\u003e\n\u003ctd\u003e400V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003ctd\u003e400–500 mm (16\"–20\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003ctd\u003e25.4 \/ 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Lengths\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e600 \/ 800 \/ 1000 \/ 1300 \/ 1500 \/ 2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Adjustment\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eHand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eGalvanized steel rails with service square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIntegrated tank with recycling pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003ePV13MCE01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANR 130 – 1 Phase (230V, 3 HP) – 1 Table\u003c\/strong\u003e — compact single-table configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANR 200 – 1 Phase (230V, 3 HP) – 2 Tables\u003c\/strong\u003e — extended two-table configuration for larger slab support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — projects blade cutting line for improved alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Tables with Rollers\u003c\/strong\u003e — smooth slab movement during cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Tables with Side Stop\u003c\/strong\u003e — added support and precision for slab processing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Profiling Device\u003c\/strong\u003e — horizontal cutting, slotting, and edge profiling with shaped wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull Handle\u003c\/strong\u003e — improved head movement control during cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransportation Wheels\u003c\/strong\u003e — attach to legs for shop floor mobility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanized Water Tank\u003c\/strong\u003e — enhanced corrosion resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHT Version\u003c\/strong\u003e — high-thickness upgrade for larger blades and increased power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eQuartzite\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStraight slab cutting for countertops and tile work\u003c\/li\u003e\n\u003cli\u003eBevel and miter cuts (45° tilt)\u003c\/li\u003e\n\u003cli\u003eEdge profiling and slotting (with optional profiling device)\u003c\/li\u003e\n\u003cli\u003eOn-site and shop cutting of marble, granite, and stone\u003c\/li\u003e\n\u003cli\u003eHigh-thickness slab cutting (HT version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabricators needing a versatile portable saw for shop and site use\u003c\/li\u003e\n\u003cli\u003eShops that need cutting and profiling capability without a full bridge saw footprint\u003c\/li\u003e\n\u003cli\u003eFabricators working across marble, granite, and engineered stone\u003c\/li\u003e\n\u003cli\u003eOperations requiring both single-phase and 3-phase power options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the ANR 130 and ANR 200?\u003c\/h3\u003e\n\u003cp\u003eThe ANR 130 comes with a single worktable; the ANR 200 includes two tables for extended slab support during longer cuts. Both run on 230V single-phase, 3 HP.\u003c\/p\u003e\n\u003ch3\u003eCan the ANR make bevel and miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts from 90° to 45° for bevel and miter work without reconfiguration.\u003c\/p\u003e\n\u003ch3\u003eWhat is the HT version?\u003c\/h3\u003e\n\u003cp\u003eThe high-thickness version accepts larger blades (400–500 mm \/ 16\"–20\") with a 3.7 kW 3-phase motor for cutting thicker slabs and harder materials.\u003c\/p\u003e\n\u003ch3\u003eCan it profile edges as well as cut?\u003c\/h3\u003e\n\u003cp\u003eYes, with the optional Slot Profiling Device — it enables horizontal cutting, slotting, and edge profiling with shaped wheels, significantly expanding the machine's capability.\u003c\/p\u003e\n\u003ch3\u003eDoes it require 3-phase power?\u003c\/h3\u003e\n\u003cp\u003eThe standard ANR 130 and ANR 200 run on 230V single-phase. The 4 HP and HT versions require 3-phase. Confirm your power supply before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow portable is it really?\u003c\/h3\u003e\n\u003cp\u003eThe legs fold flat for transport, and optional transportation wheels attach to the legs for shop floor mobility. It's designed for both shop use and job-site deployment.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — track-guided portable saw for on-site straight cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-ams-portable-bench-saw\"\u003eAchilli AMS Portable Bench Saw\u003c\/a\u003e — portable bench saw for stone fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for shop production cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — dedicated 45° miter saw for stone\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"ANR 130 – 1 Phase (230V, 3HP) – 1 Table","offer_id":51313765351648,"sku":"PV13MCE01","price":4593.8,"currency_code":"USD","in_stock":true},{"title":"ANR 200 – 1 Phase (230V, 3HP) – 2 Tables","offer_id":51313765384416,"sku":"PV20MCE01","price":6241.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/20201104_094122-rid-sfondo.png?v=1775047866"},{"product_id":"achilli-tsa-portable-track-saw","title":"Achilli TSA Portable Track Saw — On-Site Stone Slab Cutting with Modular Rail System","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/D9a1d5CqelI?si=ExcV_R-Cwi0kr_b0\" title=\"Achilli TSA Portable Track Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003ePortable Track Saw for Precision On-Site Stone Slab Cutting\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli TSA\u003c\/strong\u003e is a lightweight portable track saw built for precise straight cuts on large stone slabs — on-site, with minimal setup. Where a bridge saw stays in the shop, the TSA goes to the job. The modular rail system assembles quickly on the slab surface, the 6-bearing head travels smoothly along the track, and the one-hand water connection gets blade cooling running in seconds.\u003c\/p\u003e\n\u003cp\u003eAvailable with rail configurations from 8 ft to 13 ft, the TSA handles full-length rip cuts on countertop slabs, cladding panels, and large-format stone without needing to move material back to the shop. At 2.2 kW single-phase, it runs on standard site power with no 3-phase requirement.\u003c\/p\u003e\n\u003cp\u003eFor fabricators and installers who need shop-quality straight cuts wherever the stone is, the TSA is the tool.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eModular Rail System — Up to 13 ft\u003c\/h3\u003e\n\u003cp\u003eThree interchangeable rail configurations — 3-piece 12 ft kit, single 8 ft rail, or single 13 ft rail — cover the full range of slab lengths you're likely to cut on-site. Rails are lightweight, easy to transport, and quick to align on the slab surface.\u003c\/p\u003e\n\u003ch3\u003e6-Bearing Head for Smooth, Accurate Travel\u003c\/h3\u003e\n\u003cp\u003eThe cutting head runs on 6 precision bearings along the track — smooth, consistent travel with no lateral play that would cause a wandering cut line.\u003c\/p\u003e\n\u003ch3\u003eManual Depth Adjustment via Hand Wheel\u003c\/h3\u003e\n\u003cp\u003eCutting depth is set quickly by hand wheel — no tools required, no stopping to re-clamp. Adjust between cuts in seconds.\u003c\/p\u003e\n\u003ch3\u003eOne-Hand Water Connection\u003c\/h3\u003e\n\u003cp\u003eQuick-connect water fitting gets blade cooling running with one hand. No fumbling with fittings mid-setup on a job site.\u003c\/p\u003e\n\u003ch3\u003eSingle-Phase 230V — Runs on Site Power\u003c\/h3\u003e\n\u003cp\u003eNo 3-phase requirement. Plugs into standard site power at 230V, 50\/60 Hz — practical for installation work where 3-phase supply isn't available.\u003c\/p\u003e\n\u003ch3\u003eEpoxy Powder Coated Steel Frame\u003c\/h3\u003e\n\u003cp\u003eSandblasted and epoxy powder coated for durability in wet cutting environments. Galvanized finish available on request for additional corrosion resistance.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP), single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e300–350 mm (12\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Bore\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Bearings\u003c\/td\u003e\n\u003ctd\u003e6 precision bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Adjustment\u003c\/td\u003e\n\u003ctd\u003eManual hand wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Connection\u003c\/td\u003e\n\u003ctd\u003eOne-hand quick connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Finish\u003c\/td\u003e\n\u003ctd\u003eEpoxy powder coated steel (galvanized on request)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMOTSAM11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTSA Saw – 1 Phase (230V, 3 HP) — No Rails\u003c\/strong\u003e — saw unit only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Rail Kit (12 ft Total)\u003c\/strong\u003e — three 1250 mm sections, total 3600 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSingle Rail (8 ft \/ 2500 mm)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSingle Rail (13 ft \/ 4000 mm)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eQuartzite\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs and cladding panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOn-site rip cuts on full-size countertop slabs\u003c\/li\u003e\n\u003cli\u003eStraight cuts on cladding and wall panel stone\u003c\/li\u003e\n\u003cli\u003eJob-site slab sizing before installation\u003c\/li\u003e\n\u003cli\u003eLarge-format stone cutting where shop transport isn't practical\u003c\/li\u003e\n\u003cli\u003eInstaller cuts that would otherwise require returning material to the shop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone installers performing on-site cuts during countertop installation\u003c\/li\u003e\n\u003cli\u003eFabricators who need a portable saw for job-site work\u003c\/li\u003e\n\u003cli\u003eOperations handling large slabs that are difficult to transport back to the shop\u003c\/li\u003e\n\u003cli\u003eContractors cutting cladding and wall panel stone on location\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the maximum cut length with the TSA?\u003c\/h3\u003e\n\u003cp\u003eWith the single 13 ft (4000 mm) rail, the TSA can make straight cuts up to approximately 13 ft in a single pass. The 3-rail 12 ft kit provides similar reach with a modular setup.\u003c\/p\u003e\n\u003ch3\u003eDoes it require 3-phase power?\u003c\/h3\u003e\n\u003cp\u003eNo. The TSA runs on 230V single-phase — standard site power. No 3-phase supply required.\u003c\/p\u003e\n\u003ch3\u003eCan I buy the saw without rails and add rails later?\u003c\/h3\u003e\n\u003cp\u003eYes. The saw unit is available without rails, and rail sets (8 ft, 13 ft, or 3-piece 12 ft kit) are available separately to match your cutting requirements.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does it accept?\u003c\/h3\u003e\n\u003cp\u003e300 to 350 mm (12\" to 14\") diameter blades with a 25.4 mm (1\") bore.\u003c\/p\u003e\n\u003ch3\u003eHow does the water cooling connect?\u003c\/h3\u003e\n\u003cp\u003eVia a one-hand quick-connect fitting — fast to attach and detach on-site without tools.\u003c\/p\u003e\n\u003ch3\u003eIs the frame durable enough for regular job-site use?\u003c\/h3\u003e\n\u003cp\u003eYes. The steel frame is sandblasted and finished with epoxy powder coating for wet cutting durability. A galvanized finish is available on request for additional corrosion resistance in demanding environments.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — compact portable saw for stone cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — shop-based motorized bridge saw\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — professional miter saw for 45° stone cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-sc500-slab-cart\"\u003eAchilli SC500 Slab Cart\u003c\/a\u003e — hydraulic slab cart for shop material handling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"TSA Saw – 1 Phase (230V, 3HP) (No Rails)","offer_id":51313765417184,"sku":"MOTSAM11","price":2429.64,"currency_code":"USD","in_stock":true},{"title":"3 Rail Kit (12 ft Total)","offer_id":51313765449952,"sku":"GUI560VFZ01","price":819.87,"currency_code":"USD","in_stock":true},{"title":"Single Rail (8 ft)","offer_id":51313765482720,"sku":"GUI560DFZ05","price":623.75,"currency_code":"USD","in_stock":true},{"title":"Single Rail (13 ft)","offer_id":51313765515488,"sku":"GUI560DFZ06","price":754.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/tsa_png.webp?v=1775047870"},{"product_id":"achilli-afr-a-motorized-bridge-saw","title":"Achilli AFR-A Motorized Bridge Saw — Variable Speed Stone \u0026 Ceramic Cutting","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mnaT89-klWo?si=Zxzp8MRT2Y4vJLAt\" title=\"Achilli AFR-A Motorized Bridge Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003eCompact Motorized Bridge Saw for Stone, Ceramic \u0026amp; Sintered Fabrication\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli AFR-A\u003c\/strong\u003e is a motorized bench bridge saw built for professional fabricators who need precision, versatility, and production throughput in a compact footprint. A fixed bridge with manual tilt from 90° to 45°, motorized variable-speed head feed in both directions, and motorized Z-axis depth adjustment give you full control over every cut — straight, angled, or deep.\u003c\/p\u003e\n\u003cp\u003eAvailable in useful cut lengths from 1000 mm to 3500 mm and in a standard or HT (high-thickness) configuration, the AFR-A scales to the size of your shop and the materials you run. The special beam design reduces vibration for high-precision results, and the galvanized steel rail worktable handles the wet, abrasive environment of daily stone fabrication without degrading.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eMotorized Variable Speed Head Feed\u003c\/h3\u003e\n\u003cp\u003eBidirectional motorized head travel with variable speed control — dial in the right feed rate for granite, marble, ceramic, or sintered panels without manual pushing or inconsistent hand speed.\u003c\/p\u003e\n\u003ch3\u003eManual Bridge Tilt 90° to 45°\u003c\/h3\u003e\n\u003cp\u003eFull tilt range for straight and angled cuts. Handles miter work, bevels, and standard straight cuts from a single machine without reconfiguration.\u003c\/p\u003e\n\u003ch3\u003eMotorized Z-Axis Depth Adjustment\u003c\/h3\u003e\n\u003cp\u003eCutting depth is set and adjusted motorically along the Z-axis — precise, repeatable, and fast to change between cuts.\u003c\/p\u003e\n\u003ch3\u003eLow-Vibration Beam Design\u003c\/h3\u003e\n\u003cp\u003eThe special beam construction minimizes vibration during cutting, improving edge quality and extending blade life on demanding materials.\u003c\/p\u003e\n\u003ch3\u003eHT High-Thickness Configuration\u003c\/h3\u003e\n\u003cp\u003eThe HT version accepts 400–500 mm (16\"–20\") blades for cutting thick slabs and heavy-duty material that standard configurations can't handle.\u003c\/p\u003e\n\u003ch3\u003eMulti-Blade Capability\u003c\/h3\u003e\n\u003cp\u003eCompatible with multiple blade setups for anti-slip groove processing and specialized surface finishes — expands the machine's application range beyond standard straight cuts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUseful Cut Length\u003c\/td\u003e\n\u003ctd\u003e1000 \/ 1500 \/ 2000 \/ 2500 \/ 3000 \/ 3300 \/ 3500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter (Standard)\u003c\/td\u003e\n\u003ctd\u003e250–350 mm (10\"–14\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter (HT Version)\u003c\/td\u003e\n\u003ctd\u003e400–500 mm (16\"–20\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power (Standard)\u003c\/td\u003e\n\u003ctd\u003e5 kW (6.5 HP), 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power (HT Version)\u003c\/td\u003e\n\u003ctd\u003e4 kW (5.5 HP), 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Feed\u003c\/td\u003e\n\u003ctd\u003eMotorized, variable speed, bidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Tilt\u003c\/td\u003e\n\u003ctd\u003eManual, 90° to 45°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Adjustment\u003c\/td\u003e\n\u003ctd\u003eMotorized Z-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorktable\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater System\u003c\/td\u003e\n\u003ctd\u003eIntegrated tank with recycling pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMF35ACE63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel Cut Device\u003c\/strong\u003e — adjustable side stop for precise, repeatable parallel cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Angle Square (600 mm)\u003c\/strong\u003e — improves angular cutting accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Guide\u003c\/strong\u003e — projects blade cutting line for enhanced alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Tables with Rollers (1000 x 458 mm)\u003c\/strong\u003e — smooth slab movement and material positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHT Version\u003c\/strong\u003e — high-thickness configuration for larger blades and heavy-duty cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eCeramic and large-format porcelain panels\u003c\/li\u003e\n\u003cli\u003eSintered stone (Dekton, Neolith, etc.)\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStraight slab cutting for countertops and cladding\u003c\/li\u003e\n\u003cli\u003e45° miter and bevel cuts\u003c\/li\u003e\n\u003cli\u003eAnti-slip groove processing with multi-blade setup\u003c\/li\u003e\n\u003cli\u003eHigh-thickness slab cutting (HT version)\u003c\/li\u003e\n\u003cli\u003eProduction cutting in small to large fabrication shops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabrication shops needing a compact, versatile bridge saw\u003c\/li\u003e\n\u003cli\u003eFabricators working across granite, marble, ceramic, and sintered materials\u003c\/li\u003e\n\u003cli\u003eShops requiring both straight and angled cuts from one machine\u003c\/li\u003e\n\u003cli\u003eOperations scaling from small benchtop to full 3500 mm production cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the maximum cut length of the AFR-A?\u003c\/h3\u003e\n\u003cp\u003eThe AFR-A is available in useful cut lengths up to 3500 mm, with configurations at 1000, 1500, 2000, 2500, 3000, 3300, and 3500 mm.\u003c\/p\u003e\n\u003ch3\u003eCan it make 45° miter cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The bridge tilts manually from 90° to 45° for angled cuts, bevels, and miter work.\u003c\/p\u003e\n\u003ch3\u003eWhat is the HT version?\u003c\/h3\u003e\n\u003cp\u003eThe HT (high-thickness) version accepts larger blades (400–500 mm \/ 16\"–20\") for cutting thicker slabs and heavy-duty materials that the standard configuration cannot handle.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply does the AFR-A require?\u003c\/h3\u003e\n\u003cp\u003e3-phase power. The standard motor runs at 5 kW (6.5 HP); the HT version at 4 kW (5.5 HP). Available at 230V or 400V, 50\/60 Hz — confirm your shop supply before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes it include a water cooling system?\u003c\/h3\u003e\n\u003cp\u003eYes. An integrated water tank with recycling pump is included for blade cooling during operation.\u003c\/p\u003e\n\u003ch3\u003eWhat optional accessories are available?\u003c\/h3\u003e\n\u003cp\u003eParallel cut device, adjustable angle square, laser guide, side roller tables, and the HT high-thickness configuration.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — dedicated 45° miter saw for seamless stone miters\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router for countertop finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-top-manual-working-center\"\u003eAchilli TOP Manual Working Center\u003c\/a\u003e — manual working center for countertop fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — portable track saw for on-site slab cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-sc500-slab-cart\"\u003eAchilli SC500 Slab Cart\u003c\/a\u003e — slab transport and handling cart\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFurther Reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/product-spotlight\/achilli-bridge-saw-buyers-guide-afr-a-vs-msa-which-saw-is-right-for-your-shop\"\u003eAchilli Bridge Saw Buyer's Guide: AFR-A vs MSA — Which Saw is Right for Your Shop?\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"Default Title","offer_id":51313765744864,"sku":"MF35ACE63","price":18965.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/AFR-A22scon-rid.jpg?v=1775047877"},{"product_id":"achilli-msa-professional-miter-saw","title":"Achilli MSA Professional Miter Saw — High-Precision 45° Stone Miter Saw","description":"\u003ch2\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mnaT89-klWo?si=ZxeCW3pT1FcfMe_P\" title=\"Achilli MSA Professional Miter Saw\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\n\u003ch2\u003eHigh-Precision 45° Miter Saw for Professional Stone Fabrication\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli MSA\u003c\/strong\u003e is a professional bridge-style miter saw engineered specifically for accurate 45° miter cuts on marble, granite, ceramic, and sintered materials. Where standard saws struggle with uncalibrated slabs and width limitations, the MSA eliminates both problems — face-down cutting geometry ensures flawless miters regardless of slab thickness variation, and the open worktable design imposes no width restriction on the material being processed.\u003c\/p\u003e\n\u003cp\u003eLinear guides with recirculating ball slides, automatic lubrication, and motorized variable-speed head travel give you the kind of repeatable precision that high-end countertop and cladding work demands. The heavy-duty hot-dip galvanized steel frame is built for continuous production use, not occasional shop cuts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eFace-Down Cutting for Perfect 45° Miters\u003c\/h3\u003e\n\u003cp\u003eProcessing slabs face-down eliminates the surface variation that causes miter angle errors on uncalibrated material — the reference surface is always consistent, so the miter is always accurate.\u003c\/p\u003e\n\u003ch3\u003eNo Slab Width Limitation\u003c\/h3\u003e\n\u003cp\u003eThe open worktable design handles slabs of any width. No re-positioning, no width-based constraints on what you can run through the machine.\u003c\/p\u003e\n\u003ch3\u003eLinear Guides with Recirculating Ball Slides\u003c\/h3\u003e\n\u003cp\u003ePrecision linear motion system delivers smooth, accurate head travel with minimal play — critical for consistent miter angles across long cuts.\u003c\/p\u003e\n\u003ch3\u003eMotorized Variable Speed Head Travel\u003c\/h3\u003e\n\u003cp\u003eBlade speed adjustable from 800 to 3400 RPM. Dial in the right speed for the material — slower for hard granite and quartzite, faster for ceramic and sintered panels.\u003c\/p\u003e\n\u003ch3\u003e10 Pneumatic Pistons + 3 Slab Stops\u003c\/h3\u003e\n\u003cp\u003eSecure slab positioning without manual clamping. Pneumatic pop-up stops handle thin ceramic and sintered materials safely.\u003c\/p\u003e\n\u003ch3\u003eHot-Dip Galvanized Steel Frame\u003c\/h3\u003e\n\u003cp\u003eCorrosion-resistant construction built for wet shop environments. Removable splash guards along the full worktable length keep the machine clean and accessible.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eX-Axis Travel\u003c\/td\u003e\n\u003ctd\u003e3300 \/ 3700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Diameter\u003c\/td\u003e\n\u003ctd\u003e350–450 mm (14\"–18\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Material Thickness\u003c\/td\u003e\n\u003ctd\u003e0–80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e5.5 kW (7.5 HP), 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable Speed\u003c\/td\u003e\n\u003ctd\u003e800–3400 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V \/ 400V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlab Positioning\u003c\/td\u003e\n\u003ctd\u003e10 pneumatic pistons, 3 slab stops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty steel, hot-dip galvanized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMQMSA19L-AHH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMSA 3700 – 3 Phase (7.5 HP, Variable Speed)\u003c\/strong\u003e — full production configuration with motorized variable speed head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Extension Table (PVC Rollers)\u003c\/strong\u003e — expands working area for larger slab handling and positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eCeramic and large-format porcelain panels\u003c\/li\u003e\n\u003cli\u003eSintered stone (Dekton, Neolith, etc.)\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs up to 80 mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e45° miter cuts for seamless countertop edges\u003c\/li\u003e\n\u003cli\u003eWaterfall island edges and book-matched miters\u003c\/li\u003e\n\u003cli\u003eCladding and wall panel miter joints\u003c\/li\u003e\n\u003cli\u003eHigh-end kitchen and bathroom countertop fabrication\u003c\/li\u003e\n\u003cli\u003eLarge-format sintered and ceramic panel processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabrication shops specializing in high-end countertop work\u003c\/li\u003e\n\u003cli\u003eFabricators running waterfall edges and book-matched miters\u003c\/li\u003e\n\u003cli\u003eShops processing ceramic and sintered panels at production volume\u003c\/li\u003e\n\u003cli\u003eOperations requiring repeatable 45° accuracy across uncalibrated slabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does the MSA cut face-down?\u003c\/h3\u003e\n\u003cp\u003eFace-down cutting uses the finished face of the slab as the reference surface, eliminating thickness variation errors that cause miter angle inconsistency on uncalibrated material. The result is a consistently accurate 45° miter regardless of slab calibration.\u003c\/p\u003e\n\u003ch3\u003eIs there a width limit on slabs the MSA can process?\u003c\/h3\u003e\n\u003cp\u003eNo. The open worktable design imposes no width restriction — you can run full-width slabs without re-positioning.\u003c\/p\u003e\n\u003ch3\u003eWhat blade sizes does the MSA accept?\u003c\/h3\u003e\n\u003cp\u003e350 mm to 450 mm (14\" to 18\") diameter blades.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply does the MSA require?\u003c\/h3\u003e\n\u003cp\u003eThe MSA 3700 runs on 3-phase power at 230V or 400V, 50\/60 Hz. Confirm your shop's electrical supply before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan it handle sintered stone and large-format ceramic panels?\u003c\/h3\u003e\n\u003cp\u003eYes. Pneumatic pop-up slab stops are specifically designed for safe handling of thin ceramic and sintered materials.\u003c\/p\u003e\n\u003ch3\u003eWhat optional accessories are available?\u003c\/h3\u003e\n\u003cp\u003eSide extension table with PVC rollers, pop-up hydraulic rollers for slab loading, and an integrated water tank recycling system for blade cooling.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-proedge-portable-router\"\u003eAchilli ProEdge Portable Router\u003c\/a\u003e — portable edge profiling router for countertop finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for precision slab cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-top-manual-working-center\"\u003eAchilli TOP Manual Working Center\u003c\/a\u003e — manual working center for countertop fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — portable track saw for on-site slab cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-sc500-slab-cart\"\u003eAchilli SC500 Slab Cart\u003c\/a\u003e — slab transport and handling cart\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFurther Reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/how-to-guides\/how-to-cut-perfect-45-miters-on-stone-a-professional-guide\"\u003eHow to Cut Perfect 45° Miters on Stone: A Professional Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/product-spotlight\/achilli-bridge-saw-buyers-guide-afr-a-vs-msa-which-saw-is-right-for-your-shop\"\u003eAchilli Bridge Saw Buyer's Guide: AFR-A vs MSA — Which Saw is Right for Your Shop?\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"MSA 3700 – 3 Phase (7.5HP, Variable Speed)","offer_id":51313765777632,"sku":"MQMSA19L-AHH","price":45398.2,"currency_code":"USD","in_stock":true},{"title":"Side Extension Table (PVC Rollers)","offer_id":51313765810400,"sku":"BAN550VFZ01","price":1210.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/msa-1_png.webp?v=1775047880"},{"product_id":"achilli-proedge-portable-router","title":"Achilli ProEdge Portable Router — Precision Edge Profiling for Stone Fabrication","description":"\u003ch2\u003ePortable Edge Profiling Router for Professional Stone Fabrication\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAchilli ProEdge\u003c\/strong\u003e is a portable router engineered for fast, precise edge profiling on granite, marble, quartz, quartzite, and natural stone. Designed for professional fabrication shops, it delivers custom profiles with consistent results — compact enough to move around the slab, powerful enough to run all day.\u003c\/p\u003e\n\u003cp\u003eThe aquaplaning base glides smoothly across the slab surface, eliminating the drag and chatter that causes inconsistent profiles. Vertical rise-and-fall adjustment gives you precise depth control without stopping to re-clamp or reposition. At 2.2 kW and 9000 RPM, it has the power to handle thick material and shaped wheels without bogging down.\u003c\/p\u003e\n\u003cp\u003eFor fabricators who need a reliable portable router that doesn't compromise on precision or throughput, the ProEdge is the benchmark.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003ch3\u003eAquaplaning Base for Smooth, Stable Movement\u003c\/h3\u003e\n\u003cp\u003eThe water-lubricated base floats across the slab surface, reducing friction and vibration for consistent, chatter-free profiles on every pass.\u003c\/p\u003e\n\u003ch3\u003eVertical Rise-and-Fall Adjustment\u003c\/h3\u003e\n\u003cp\u003e20 mm of vertical stroke allows precise depth control on the fly — no stopping, no re-clamping, no lost time between passes.\u003c\/p\u003e\n\u003ch3\u003e2.2 kW \/ 3 HP Motor at 9000 RPM\u003c\/h3\u003e\n\u003cp\u003eEnough power to run shaped profile wheels through granite and quartzite at production speed without overheating or stalling.\u003c\/p\u003e\n\u003ch3\u003eCompatible with Shaped Profile Wheels\u003c\/h3\u003e\n\u003cp\u003eAccepts standard shaped wheels for bullnose, ogee, bevel, and custom profiles — adaptable to any edge specification your customers require.\u003c\/p\u003e\n\u003ch3\u003eCompact Portable Design\u003c\/h3\u003e\n\u003cp\u003eBuilt for shop flexibility. Move it to the slab, not the slab to the machine. Balanced design keeps operator fatigue low during extended runs.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Continuous Professional Use\u003c\/h3\u003e\n\u003cp\u003eSturdy construction rated for demanding fabrication environments — not a hobbyist tool dressed up in professional packaging.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Power\u003c\/td\u003e\n\u003ctd\u003e2.2 kW (3 HP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230V, 1-phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation Speed\u003c\/td\u003e\n\u003ctd\u003e9,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical Stroke\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Material Thickness\u003c\/td\u003e\n\u003ctd\u003e60 mm (2.4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase System\u003c\/td\u003e\n\u003ctd\u003eAquaplaning (water-lubricated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e34 kg (75 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMTPROEDGM01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAchilli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite\u003c\/li\u003e\n\u003cli\u003eMarble\u003c\/li\u003e\n\u003cli\u003eQuartz and engineered stone\u003c\/li\u003e\n\u003cli\u003eQuartzite\u003c\/li\u003e\n\u003cli\u003eNatural stone slabs up to 60 mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBullnose, ogee, bevel, and custom edge profiles\u003c\/li\u003e\n\u003cli\u003eKitchen and bathroom countertop edge finishing\u003c\/li\u003e\n\u003cli\u003eVanity tops and stone furniture edges\u003c\/li\u003e\n\u003cli\u003eHigh-volume production edge profiling in fabrication shops\u003c\/li\u003e\n\u003cli\u003eCustom profile work requiring repeatable depth control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStone fabrication shops running production edge work\u003c\/li\u003e\n\u003cli\u003eCountertop fabricators working with granite, quartz, and quartzite\u003c\/li\u003e\n\u003cli\u003eShops needing a portable router that moves to the slab\u003c\/li\u003e\n\u003cli\u003eFabricators requiring consistent profiles across high volumes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat edge profiles can the ProEdge produce?\u003c\/h3\u003e\n\u003cp\u003eThe ProEdge is compatible with standard shaped profile wheels — bullnose, ogee, bevel, eased edge, and custom profiles. Profile capability depends on the wheel set used.\u003c\/p\u003e\n\u003ch3\u003eWhat materials can it handle?\u003c\/h3\u003e\n\u003cp\u003eGranite, marble, quartz, quartzite, and natural stone up to 60 mm (2.4\") thick.\u003c\/p\u003e\n\u003ch3\u003eWhat voltage does the ProEdge require?\u003c\/h3\u003e\n\u003cp\u003e230V, single-phase, 50\/60 Hz. Confirm your shop's electrical supply before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs the aquaplaning base water-fed?\u003c\/h3\u003e\n\u003cp\u003eYes — the base uses water lubrication for smooth glide across the slab surface. A water supply connection is required during operation.\u003c\/p\u003e\n\u003ch3\u003eHow does the vertical adjustment work?\u003c\/h3\u003e\n\u003cp\u003eThe rise-and-fall system provides 20 mm of vertical stroke, allowing precise depth control during profiling without stopping to reposition the machine.\u003c\/p\u003e\n\u003ch3\u003eIs this a production machine or a shop tool?\u003c\/h3\u003e\n\u003cp\u003eBoth. The ProEdge is built for continuous professional use in fabrication shops — it handles production volume while remaining portable enough to bring to the slab.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMore from Achilli\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-afr-a-motorized-bridge-saw\"\u003eAchilli AFR-A Motorized Bridge Saw\u003c\/a\u003e — motorized bridge saw for precision slab cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-top-manual-working-center\"\u003eAchilli TOP Manual Working Center\u003c\/a\u003e — manual working center for countertop fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-msa-professional-miter-saw\"\u003eAchilli MSA Professional Miter Saw\u003c\/a\u003e — professional miter saw for stone\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-tsa-portable-track-saw\"\u003eAchilli TSA Portable Track Saw\u003c\/a\u003e — portable track saw for slab cutting on site\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/achilli-anr-portable-stone-saw\"\u003eAchilli ANR Portable Stone Saw\u003c\/a\u003e — compact portable saw for stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFurther Reading\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/how-to-profile-stone-edges-like-a-pro-a-guide-to-the-achilli-proedge-portable-router\"\u003eHow to Profile Stone Edges Like a Pro: A Guide to the Achilli ProEdge Portable Router\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Achilli","offers":[{"title":"Default Title","offer_id":51313765843168,"sku":"MTPROEDGM01","price":5362.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/files\/ProEdgeIT-ING1-3.jpg?v=1775047881"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/3943\/1904\/collections\/rock_dog.jpg?v=1771159331","url":"https:\/\/protoolhaus.com\/collections\/saws-routers.oembed","provider":"Pro Tool Haus","version":"1.0","type":"link"}