Halloween kit sale · 10% off every kit · ends Oct 31 at midnight · — left
Pro Tool Haus
October 28 to 31 only Boo. It's the good stuff.

Scary
good kits.

Tonight, cut quartzite

Four job kits, each one already 10% under the parts. No code, no tricks. Over $350 ships free. When the clock strikes midnight on the 31st, the prices go back.

Shop the kits Trick or treat
0Days
00Hours
00Minutes
00Seconds
They are watching you. Move the mouse.
Free UPS Ground over $350Contiguous US
Ships same dayFrom Charlotte, NC
Walk-ins welcome11626 Wilmar Blvd Ste C
Trick or treat

Knock on a door.
See what answers.

Four doors. Behind three of them, a kit at Halloween price. Behind one, a trick. Knock on all four if you like, nobody is counting.

1Knock

Chip Repair Kit

TeFill 1, 2, 3 and ceramic blades.

$64.37$71.52See the kit
2Knock

Quartzite Kit

White Lion blade, Trio pads, Proseal Nano.

$428.44$476.04See the kit
3Knock
👻

Boo. A trick.

Nothing here but a ghost and a tip: never shave fill with a steel blade on a polished edge. Ceramic only.

Try the wheel
4Knock

Porcelain Kit

Diamant-D blade, DiStar Rocket, Glaxs Easy.

$378.14$420.15See the kit

The Seam & Fill kit is hiding on the wheel below. It is shy.

Wheel of fortune

Not sure which kit?
Spin the wheel.

Every slice is a real kit at Halloween price, so there is nothing to lose. The wheel picks a job, we take you to the kit for it.

Press spin to start.

Chip Repair Kit

TENAX TeFill 1, 2, 3 + ceramic blades

$64.37$71.52

See the kit

Seam & Fill Kit

Universal Colour ×10 + Glaxs Easy + blades

$170.10$189.00

See the kit

Quartzite Kit

White Lion blade + Trio pads + Proseal Nano

From $428.44$476.04

See the kit

Porcelain Kit

Diamant-D blade + DiStar Rocket + Glaxs Easy

From $378.14$420.15

See the kit
The kits

Four kits. Four jobs you already do.

Each kit is the full set of consumables for one job, put together by someone who has stood at the saw. The price you see is the price you pay, until midnight on the 31st.

Tenax TeFill repair kit with ceramic razor blades
Save $7.15

Chip happens. Be ready.

The kit every install truck should carry. Thin and thick cyanoacrylate, the activator, and the blades to shave it flush. Fixes a chipped edge on site, before the homeowner sees it.

  • TENAX TeFill Kit, set of three (TeFill 1, 2 and 3)
  • TENAX ceramic razor blades, pack of 10
On the jobFillTeFill 1 for hairlines, TeFill 2 for the deep chip.
ThenCureA spray of TeFill 3. Hard in seconds.
ThenShaveCeramic blade takes it flush, no scratch on the polish.
$64.37$71.52
Add it to a blade kit and the whole order ships free. On its own it is $285.63 short.
View kit
Tenax Universal Colour paste set with Glaxs Easy adhesive and blades
Save $18.90

Match any stone.

Ten colour pastes, a clear two part glue that never yellows, and blades to clean it up. The seam kit for the fabricator who refuses to leave a visible line.

  • TENAX Universal Colour set, ten colours
  • TENAX Glaxs Easy half quart kit, Part A and Part B together
  • TENAX ceramic razor blades
On the jobTintMix Universal Colour into the glue until it disappears into the slab.
ThenGlueGlaxs Easy. Clear now, still clear in five years.
ThenShaveCeramic blade. The seam is there, nobody can find it.
$170.10$189.00
Pair it with a blade kit and the order ships free. On its own it is $179.90 short.
View kit
Weha White Lion blade, Trio polishing pads and Tenax Proseal Nano sealer
Save $47.60

Cut. Polish. Protect.

Quartzite eats blades and laughs at the wrong pads. A blade built for the hardest stone, three step pads, and the sealer that actually holds.

On the jobCutWhite Lion bridge saw blade, 14" or 16".
ThenPolishWeha Trio. Three pads, rough to mirror.
ThenSealProseal Nano, one quart. Holds on dense quartzite.
from$428.44$476.04

Over $350, UPS Ground is on us.

View kit
Diamant-D porcelain blade, DiStar Rocket core bit and Tenax Glaxs Easy
Save $42.01

Cut. Core. Miter.

Porcelain chips at the edge if the blade is wrong and cracks at the cutout if the bit is wrong. This set does neither.

On the jobCutDiamant-D bridge saw blade, 14" or 16".
ThenCoreDiStar Rocket 1 3/8" bit. Faucet holes with no blowout.
ThenMiterGlaxs Easy A plus B. A joint that disappears.
from$378.14$420.15

Over $350, UPS Ground is on us.

View kit
The graveyard

Here lie the problems
these kits bury.

Every stone below is a job that used to go wrong. Pay your respects, then take the kit that killed it.

Chipped edgesFound on a Friday install, 2014 to 2026. Survived by nobody.Chip Repair Kit Yellow seamsLooked fine on day one. Looked like mustard by spring.Seam & Fill Kit Dull blades on quartziteFought the hardest stone with the wrong steel. Lost.Quartzite Kit Blown-out faucet holesCracked at the cutout, in front of the customer.Porcelain Kit
a note from the shop

A letter
from Brian

Not a marketing team. One guy in Charlotte who has spent his working life around stone, writing to the people who cut it.

To every fabricator who opened this,

I want to say something before the sale part. Thank you. Most people will never know what it takes to turn a slab into a kitchen a family eats breakfast at for twenty years. You know. You carry the weight, you breathe the dust, you fix the chip nobody else would have noticed. The work is invisible when it is done right, and you do it right.

I spent years on the supplier side with Weha and TENAX before we opened Pro Tool Haus. In all that time, the thing I kept hearing from shops was the same. Not "give me cheaper." It was "give me the right thing, the first time, without a sales pitch." That is the whole reason this place exists.

These four kits are what I would hand to a friend starting a shop. Nothing in them is filler. Every blade, pad, glue and bottle is something I have used with my own hands and would stand behind in front of your customer.

Ten percent off through Halloween is my way of saying what I said at the top. If you are ever near Wilmar Boulevard, walk in. The coffee is average, the advice is free, and I would like to shake your hand. And if you reply to the email, it is me reading it.

BrianBrian Gambrell, Pro Tool Haus, Charlotte NC
704-704-5125 · brian@protoolhaus.com
Picked by
hand
Charlotte NC
Last call

Midnight is coming.

When the countdown hits zero the kits go back to full price and the pumpkins go back in the box. Until then, 10% off, no code, free shipping over $350.

0Days
00Hours
00Minutes
00Seconds
Shop the kits before midnight

Halloween sale
10% off every kit, no code

Shop the kits