Описание
This 1 3/8-inch CNC core bit is designed for drilling Dekton, Neolith, and porcelain with compatible CNC equipment. A thin crown supports fast drilling, while precise concentricity helps keep the bit centered during rotation. The 1/2 Gas connection fits compatible CNC tooling setups.
CNC core drilling for Dekton, Neolith, and porcelain
Choose this core bit when your fabrication project requires a 1 3/8-inch hole in Dekton, Neolith, or porcelain. Its material-specific application and thin-crown design make the intended use clear without relying on settings for granite or other stone drilling bits.
Features and specifications
- Drilling diameter: 1 3/8 inches.
- Connection: 1/2 Gas.
- Machine application: compatible CNC equipment.
- Suitable materials: Dekton, Neolith, and porcelain.
- Thin crown for fast drilling.
- Precise concentricity.
Operating parameters
- Spindle speed: 1,520 RPM.
- Feed rate: 20mm per minute.
Confirm the connection, required drilling diameter, and machine compatibility before ordering. Follow the operating requirements for your equipment and the specific material being drilled.
Compare PTH finger bits, finger tips, and core bits
Choose by material, machining task, and machine connection. Finger bits and incremental finger tips are for cutting and material removal; core bits are for drilling holes.
- SKU 50028: CNC finger bit — Granite, marble, quartz and engineered stone. Machines: CNC machines; 1/2 Gas connection.
- SKU 50029: CNC finger bit — Quartzite and hard materials. Machines: CNC machines; 1/2 Gas connection.
- SKU 50030: CNC finger bit — Porcelain and ultra-compact surfaces, including Dekton and Neolith. Machines: Compatible CNC machines.
- SKU 50035: Incremental finger tip bit — Granite, marble and quartz. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50036: Incremental finger tip bit — Dekton, Neolith and ultra-compact surfaces; also quartzite, granite and engineered stone. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50037: Incremental finger tip bit — Quartzite, granite and quartz. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50045: 1 3/8-inch core bit — Hole drilling in quartzite, hard granite and quartz. Machines: Compatible CNC machines.
Confirm the connection, dimensions, and operating parameters on each product page. CNC and radial arm tooling are not interchangeable unless your machine setup supports the specified connection.