Description
The PTH twin 8-segment CNC finger bit is designed for machining porcelain and ultra-compact surfaces (UCS), including Dekton, Neolith, and applicable Daltile porcelain and compact-surface products. Built for countertop fabrication, this finger bit provides a material-specific option for CNC cutting and stock removal in these surfaces.
CNC machining for porcelain and ultra-compact surfaces
Choose this PTH finger bit for porcelain and UCS fabrication The twin 8-segment configuration is paired with the operating guidance below for controlled feed rates through different Dekton hardness categories.
Material and tool details
- Configuration: twin 8-segment finger bit.
- Application: CNC stone and countertop fabrication.
- Suitable material categories: porcelain and ultra-compact surfaces.
- Material examples: Dekton, Neolith, and applicable Daltile products.
Operating parameters
- Spindle speed: 5000–5,500 RPM.
- Starting feed rate: 5 inches per minute.
- Soft and medium Dekton: 6–10 inches per minute.
- Hard Dekton: 6–8 inches per minute.
Start slowly, then increase the feed rate
Begin at a feed rate of 5 inches per minute, then gradually increase the feed rate within the range for the Dekton hardness being machined. Adjust for the specific material, machine setup, and cutting engagement. The Dekton feed-rate ranges above are not separate recommendations for Neolith or Daltile products.
Confirm the bit dimensions, connection, and machine compatibility before ordering.
Compare PTH finger bits, finger tips, and core bits
Choose by material, machining task, and machine connection. Finger bits and incremental finger tips are for cutting and material removal; core bits are for drilling holes.
- SKU 50028: CNC finger bit — Granite, marble, quartz and engineered stone. Machines: CNC machines; 1/2 Gas connection.
- SKU 50029: CNC finger bit — Quartzite and hard materials. Machines: CNC machines; 1/2 Gas connection.
- SKU 50035: Incremental finger tip bit — Granite, marble and quartz. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50036: Incremental finger tip bit — Dekton, Neolith and ultra-compact surfaces; also quartzite, granite and engineered stone. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50037: Incremental finger tip bit — Quartzite, granite and quartz. Machines: Radial arm and CNC machines; M12 connection.
- SKU 50040: 1 3/8-inch core bit — Hole drilling in Dekton, Neolith and porcelain. Machines: CNC machines; 1/2 Gas connection.
- SKU 50045: 1 3/8-inch core bit — Hole drilling in quartzite, hard granite and quartz. Machines: Compatible CNC machines.
Confirm the connection, dimensions, and operating parameters on each product page. CNC and radial arm tooling are not interchangeable unless your machine setup supports the specified connection.