Proxxon Machine Vise — Milled Steel, 60mm Jaws, 42mm Capacity, Multi-Position (No. 24255)

Precision workholding in three orientations. The Proxxon machine vise (No. 24255) is milled from solid steel for rigidity and accuracy — essential for milling and drilling operations where workpiece movement would ruin the cut. With 60mm jaw width and 42mm clamping capacity, it handles a wide range of workpiece sizes, and the ability to mount on its side and back gives you three clamping orientations for maximum setup flexibility. Mounting bolts and a wooden storage box are included.

Key Specifications

• Material: Milled steel
• Jaw width: 2-3/8" (60mm)
• Clamping capacity: 1-2/3" (42mm)
• Mounting orientations: Standard, on side, and on back
• Includes: Mounting bolts, wooden storage box
• Weight: 1,514g (3.3 lb)
• Part No.: 24255

Best Uses

• Workholding on milling machines (MF 70, FF 230, and similar)
• Securing workpieces on compound tables and cross slides
• Precision drilling where workpiece rigidity is critical
• Angled clamping using side and back mounting orientations

Machine Vise vs. Clamping Fixture — Which Do You Need?

• Machine Vise (No. 24255) — this vise: Milled steel, 60mm jaws, 42mm capacity. Best for holding rectangular and prismatic workpieces securely for milling and drilling. Three mounting orientations for setup flexibility.
• Eccentric Clamping Fixture ES 70 (No. 24270): 70mm jaws with T-nuts for the MF 70 and KT 70 table slots. Best for clamping irregular or large workpieces directly to the machine table.

Frequently Asked Questions

Is this compatible with the Proxxon MF 70?
Yes — the machine vise can be mounted to the MF 70 milling machine table using the included mounting bolts. Verify T-slot compatibility with your specific machine table.

Can this be used on a compound table?
Yes — the vise can be mounted to the KT 230 Compound Table for use with drill presses and milling machines.

What's the advantage of the side and back mounting orientations?
Mounting the vise on its side or back allows you to clamp workpieces in orientations that would be impossible with a standard upright vise — useful for angled drilling, side milling, and complex setups.

Works Well With

• Proxxon Eccentric Clamping Fixture ES 70 (No. 24270) — T-slot clamping for irregular workpieces on MF 70 & KT 70
• Proxxon Compound Table KT 230 (No. 24106) — X/Y travel table for use with drill presses and milling machines
• Proxxon Chip & Drip Collecting Tray for MF 70 & FF 230 (No. 24116) — keeps the work area clean during milling operations
• Proxxon Dividing Attachment for MF 70 & KT 70 (No. 24264) — for indexed rotary work on the MF 70

Returns can only be accepted for unused product in its original packaging. A copy of the original packing slip or invoice is required. For warranty claims please call 1-877-776-9966. Please see our return and refund policy here.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.