Description
Cut Backsplashes Thinner — Safely, Accurately, Every Time
The Stone Pro Splash Splitter is a vacuum-hold backsplash cutting jig designed to clamp onto your bridge saw table and securely hold stone backsplashes in place while you step-cut them to any thickness. No more wrestling with awkward pieces or relying on a second set of hands — the Splash Splitter locks the stone in place with 10 evenly dispersed vacuum suction cups so you can focus on the cut.
Whether you're cutting a 10" piece or a 10' slab, the Splash Splitter handles it. Cut down to ½", ⅜", or thinner depending on your material — you're only limited by twice the depth your saw can cut.
Key Features
- 10 evenly dispersed vacuum suction cups for consistent hold across the full length
- Holds backsplashes from 10" up to 10' or longer
- Cut down to ½", ⅜", or thinner depending on material
- Individual valve control per chamber — activate only the cups you need for the piece length
- Clamps to any bridge saw table with a standard C-clamp (not included)
- Flip the piece to continue if the arbor plate is in the way
- Requires 5 CFM or greater air compressor (not included)
- Splash Splitter Dimensions: 100 x 5 x 3 in
- Crate Dimensions: 102 × 7¼ × 5¼ in
How It Works
Clamp the Splash Splitter to your saw table, parallel to the blade. Connect your air supply to the venturi vacuum. Activate only the valves that correspond to the length of the backsplash being cut — sequentially, one at a time. Place the stone against the cups and the vacuum holds it firmly in place. Step-cut to your target thickness. That’s it.
Pro tip: Always activate valves one at a time in order. Activating them simultaneously can cause vacuum loss and failure to secure the stone. If a backsplash overlaps only halfway into a chamber, leave that valve off to maintain full vacuum pressure.
*Note: Price does not include shipping. Contact us for a freight quote.