Description
Two targeted stain removal treatments in one kit. The Tenax TeBlossom & TeClean Kit bundles two specialized poultice treatments: TeBlossom for blue and green cyanoacrylate bloom from chip repair adhesives, and TeClean for everyday organic stains like oil, grease, wine, coffee, and tea. Together they cover the most common staining scenarios faced by stone fabricators and installers.
What's Included
TeBlossom — Blue & Green Bloom Remover
A 2-part chemical poultice specifically formulated to remove the blue or green staining that can occur after using cyanoacrylate-based chip repair kits on stone surfaces. This discoloration — commonly called "bloom" — is a known side effect of CA adhesive activators and can be difficult to remove without the right chemistry. TeBlossom lifts the stain without etching the stone, making it safe for use on polished and honed surfaces.
- Removes: Blue and green cyanoacrylate bloom from chip repair adhesives
- Safe: Does not etch the stone surface
- Format: 2-part chemical poultice
- Size: 8 oz kit
TeClean — Organic Stain Remover Poultice Powder
A stone-safe poultice powder that uses surfactants and diatomaceous earth to draw organic stains out of porous stone surfaces. Pulls the stain up and out of the stone without harsh scrubbing or surface damage.
- Removes: Oil, grease, wine, tea, coffee, and other organic stains
- Compatible surfaces: Granite, marble, travertine, limestone, terrazzo, concrete, brick, sanded grout
- Formula: Stone-safe surfactants and diatomaceous earth
How to Use (Both Products)
- Mix the powder (or 2-part TeBlossom components) to a toothpaste-like consistency.
- Apply the poultice directly over the stained area.
- Cover with plastic wrap and puncture several small holes with a toothpick to allow slow drying.
- Leave in place for 24–48 hours until fully dried.
- Remove the dried poultice — the stain will be drawn out with it.
- Rinse the surface clean and inspect. Repeat if necessary for stubborn stains.
Note: Calcium-based stones (marble, travertine, limestone) may etch during treatment and require re-polishing after use.
Key Features
- Two-product kit — TeBlossom for CA bloom + TeClean for organic stains; one kit covers both
- No etching — TeBlossom formulated to remove bloom without damaging polished stone
- Poultice method — draws stains out from within the stone; no aggressive scrubbing
- Multi-surface — safe for granite, marble, travertine, limestone, concrete, brick, and grout
- Easy application — mix, apply, cover, wait, remove; no special equipment required
- Professional grade — trusted by stone fabricators, restoration specialists, and tile installers
Works Well With
- Tenax TeBlossom — Bloom Remover Only — TeBlossom sold separately for targeted bloom removal without TeClean
- Tenax TeFill 1 — Thin Cyanoacrylate — CA adhesive most likely to cause bloom; keep TeBlossom on hand for remediation
- Tenax TeFill Chip Repair Kit — complete CA repair system; pair with this kit for full repair and bloom remediation coverage
- Tenax BrioAction 3 Professional Stain Remover — for deep cleaning and restoration of stone and masonry surfaces
- Tenax Marble Polishing Powder — re-polish calcium-based stone after TeBlossom treatment if etching occurs
Further Reading
How to Remove Stains from Stone: The Complete Identification & Removal Guide → — identify rust, CA bloom, organic stains, etch marks and more, with the right product for every stain type.