Description
Portable Track Saw for Precision On-Site Stone Slab Cutting
The Achilli TSA is a lightweight portable track saw built for precise straight cuts on large stone slabs — on-site, with minimal setup. Where a bridge saw stays in the shop, the TSA goes to the job. The modular rail system assembles quickly on the slab surface, the 6-bearing head travels smoothly along the track, and the one-hand water connection gets blade cooling running in seconds.
Available with rail configurations from 8 ft to 13 ft, the TSA handles full-length rip cuts on countertop slabs, cladding panels, and large-format stone without needing to move material back to the shop. At 2.2 kW single-phase, it runs on standard site power with no 3-phase requirement.
For fabricators and installers who need shop-quality straight cuts wherever the stone is, the TSA is the tool.
Key Features & Benefits
Modular Rail System — Up to 13 ft
Three interchangeable rail configurations — 3-piece 12 ft kit, single 8 ft rail, or single 13 ft rail — cover the full range of slab lengths you're likely to cut on-site. Rails are lightweight, easy to transport, and quick to align on the slab surface.
6-Bearing Head for Smooth, Accurate Travel
The cutting head runs on 6 precision bearings along the track — smooth, consistent travel with no lateral play that would cause a wandering cut line.
Manual Depth Adjustment via Hand Wheel
Cutting depth is set quickly by hand wheel — no tools required, no stopping to re-clamp. Adjust between cuts in seconds.
One-Hand Water Connection
Quick-connect water fitting gets blade cooling running with one hand. No fumbling with fittings mid-setup on a job site.
Single-Phase 230V — Runs on Site Power
No 3-phase requirement. Plugs into standard site power at 230V, 50/60 Hz — practical for installation work where 3-phase supply isn't available.
Epoxy Powder Coated Steel Frame
Sandblasted and epoxy powder coated for durability in wet cutting environments. Galvanized finish available on request for additional corrosion resistance.
Technical Specifications
| Specification | Detail |
|---|---|
| Motor Power | 2.2 kW (3 HP), single-phase |
| Voltage | 230V, 50/60 Hz |
| Blade Diameter | 300–350 mm (12"–14") |
| Blade Bore | 25.4 mm (1") |
| Head Bearings | 6 precision bearings |
| Depth Adjustment | Manual hand wheel |
| Water Connection | One-hand quick connect |
| Frame Finish | Epoxy powder coated steel (galvanized on request) |
| SKU | MOTSAM11 |
| Brand | Achilli |
Available Configurations
- TSA Saw – 1 Phase (230V, 3 HP) — No Rails — saw unit only
- 3 Rail Kit (12 ft Total) — three 1250 mm sections, total 3600 mm
- Single Rail (8 ft / 2500 mm)
- Single Rail (13 ft / 4000 mm)
Compatible Materials
- Granite
- Marble
- Quartz and engineered stone
- Quartzite
- Natural stone slabs and cladding panels
Common Applications
- On-site rip cuts on full-size countertop slabs
- Straight cuts on cladding and wall panel stone
- Job-site slab sizing before installation
- Large-format stone cutting where shop transport isn't practical
- Installer cuts that would otherwise require returning material to the shop
Ideal For
- Stone installers performing on-site cuts during countertop installation
- Fabricators who need a portable saw for job-site work
- Operations handling large slabs that are difficult to transport back to the shop
- Contractors cutting cladding and wall panel stone on location
Frequently Asked Questions
What is the maximum cut length with the TSA?
With the single 13 ft (4000 mm) rail, the TSA can make straight cuts up to approximately 13 ft in a single pass. The 3-rail 12 ft kit provides similar reach with a modular setup.
Does it require 3-phase power?
No. The TSA runs on 230V single-phase — standard site power. No 3-phase supply required.
Can I buy the saw without rails and add rails later?
Yes. The saw unit is available without rails, and rail sets (8 ft, 13 ft, or 3-piece 12 ft kit) are available separately to match your cutting requirements.
What blade sizes does it accept?
300 to 350 mm (12" to 14") diameter blades with a 25.4 mm (1") bore.
How does the water cooling connect?
Via a one-hand quick-connect fitting — fast to attach and detach on-site without tools.
Is the frame durable enough for regular job-site use?
Yes. The steel frame is sandblasted and finished with epoxy powder coating for wet cutting durability. A galvanized finish is available on request for additional corrosion resistance in demanding environments.
More from Achilli
- Achilli ANR Portable Stone Saw — compact portable saw for stone cutting
- Achilli AFR-A Motorized Bridge Saw — shop-based motorized bridge saw
- Achilli MSA Professional Miter Saw — professional miter saw for 45° stone cuts
- Achilli ProEdge Portable Router — portable edge profiling router
- Achilli SC500 Slab Cart — hydraulic slab cart for shop material handling