Description
The standard shop consumable for trimming cured stone adhesive. Tenax #9 Razor Blades are used to trim cured knife grade polyester, epoxy, and cyanoacrylate adhesive flush with the stone surface before polishing — the essential finishing step after every chip repair or fill. Sold in packs of 100 for uninterrupted shop use.
Key Features
- Pack of 100 — standard shop quantity for high-volume fabrication use
- Commercial-grade steel — sharp, consistent edge for clean adhesive trimming without surface damage
- Compatible with all Tenax adhesives — knife grade polyester, epoxy, cyanoacrylate, and fillers
- Single-use recommended — replace frequently for cleanest cuts and best results
- Standard #9 format — fits standard razor blade holders and scrapers
How to Use
- Allow adhesive to cure fully before trimming
- Hold the blade at a low angle (nearly flat) to the stone surface
- Shave the cured adhesive flush with the stone in smooth, controlled strokes
- Follow with polishing powder or compound to restore the surface finish
- Replace blade frequently — a dull blade drags and can damage the stone surface
Works Well With
- Tenax Colored Knife Grade Polyester — trim cured polyester chip repairs flush before polishing
- Tenax Tixo Xe Transparent Knife Grade — trim cured transparent polyester repairs
- Tenax Knife Grade Epoxy — trim cured epoxy repairs flush before polishing
- Tenax Marble Polishing Powder — restore marble surface finish after trimming and repair
- Tenax Granite Polishing Powder — restore granite surface finish after trimming and repair
- Tenax Mixing Cups 12oz (50/Sleeve) — for mixing adhesive and hardener before application