Description
The scratch-safe alternative to steel blades for trimming cured adhesive on polished stone. Tenax Ceramic Razor Blades are used to trim cured cyanoacrylate adhesive flush with polished stone surfaces — where a standard steel blade would risk scratching or marring the finish. The ceramic edge is hard enough to shave cured adhesive cleanly without damaging the polished surface beneath. Sold in packs of 100 for uninterrupted shop use.
Ceramic vs. Steel (#9) Razor Blades — Which Do You Need?
- Tenax Ceramic Razor Blades (this product) — use on polished stone surfaces (granite, marble, quartz, porcelain) where a steel blade risks scratching the finish; ideal for cyanoacrylate trim work
- Tenax #9 Steel Razor Blade — use on honed, brushed, or unpolished surfaces, or where scratch risk is lower; standard shop consumable for general adhesive trimming
Key Features
- Pack of 100 — standard shop quantity for high-volume fabrication use
- Ceramic edge — hard enough to trim cured cyanoacrylate without scratching polished stone
- Scratch-safe on polished surfaces — safe for use on polished granite, marble, quartz, and porcelain
- Single-use recommended — replace frequently for cleanest cuts and best results
- Standard format — fits standard razor blade holders and scrapers
How to Use
- Allow cyanoacrylate adhesive to cure fully before trimming
- Hold the blade at a low angle (nearly flat) to the polished surface
- Shave the cured adhesive flush in smooth, controlled strokes
- Follow with polishing compound or powder to restore the surface finish
- Replace blade frequently — a dull ceramic blade can drag and cause surface damage
Works Well With
- Tenax TeFill 1 — Thin Cyanoacrylate — trim cured TeFill 1 flush on polished stone after repair
- Tenax TeFill 2 — Thick Cyanoacrylate — trim cured TeFill 2 flush on polished stone after repair
- Tenax TeFill Chip Repair Kit — complete cyanoacrylate repair system; use ceramic blades for finishing on polished surfaces
- Tenax Marble Polishing Powder — restore marble surface finish after trimming and repair
- Tenax Granite Polishing Powder — restore granite surface finish after trimming and repair
- Tenax #9 Steel Razor Blade — steel alternative for honed or unpolished surfaces