Description
The Proxxon Tungsten Vanadium Cutters (No. 28726) are a 2-pack of cylinder round profile rotary cutters in tungsten vanadium steel for Proxxon Micromot tools. Available with 2.35mm or 3.0mm shanks. Tungsten vanadium steel combines toughness and wear resistance for a broad material range — hard and soft woods, non-ferrous and precious metals, plastics, and plaster of Paris — making these more versatile than the wood-only TC burrs or the hard-metal-only TC milling cutters.
Head and shaft are machined from a single blank for maximum stability and concentricity — eliminating the joint weakness of two-piece construction and ensuring vibration-free running at Micromot speeds.
Key Features
- Cylinder round profile — for flat surface milling, routing, and slotting with a smooth rounded end
- Tungsten vanadium steel — broad material range: wood, NF metals, precious metals, plastics, plaster
- One-piece head and shaft — maximum stability, concentricity, and tool life
- Dual shank options — 2.35mm or 3.0mm to suit your collet
- 2-pack — two cutters per set
Applications
- Milling and routing in wood and NF metals
- Shaping and profiling in plastics and plaster
- Slotting and grooving
- Precious metal work
- General Micromot rotary tool milling operations
Specifications
- Part Number: No. 28726
- Profile: Cylinder round
- Cutting diameter: ×8mm (5/16")
- Shank options: 2.35mm (3/32") or 3.0mm (7/64")
- Material: Tungsten vanadium steel
- Quantity: 2 per pack
- Materials cut: Hard and soft wood, NF metals, precious metals, plastics, plaster of Paris
TV Cutter Profile Guide
- Cylinder (flat end) / No. 28722 — for slots, steps, and flat-bottomed pockets
- Cylinder Round / No. 28726 (this cutter) — for flat surface work with smooth end transitions; no sharp corner marks
- Flame / No. 28724 — for contoured carving and concave shaping; most versatile profile
- Round (Ball) / No. 28725 — for concave hollowing, bowl shaping, and undercut work
- Rounded Cone / No. 28723 — for chamfering, angled surfaces, and V-groove work
- Wheel / No. 28727 — for edge routing and decorative profiling
Works Well With
- Professional Rotary Tool IBS/E (No. 38481) — collet-based 100W Micromot tool with 2.35mm and 3mm collets
- Precision Rotary Tool FBS 115/E (No. 38472) — keyless chuck Micromot tool accepting both shank sizes
- MICROMOT Steel Collet Set — 6-Piece (No. 28940) — includes 2.35mm and 3mm collets for this cutter
- TV Cutters — Cylinder (No. 28722) — flat-end sibling for slot and pocket work
- TC Cutter Set — Sphere & Cylinder (No. 28750) — TC alternative for harder metal applications
- TC Burrs — Ball Nose (No. 29060) — TC alternative for wood and GRP specialist work
Learn More
Not sure which cutter is right for your material? Read our Proxxon Micromot Cutter Guide — TV Steel vs. TC Burrs vs. TC Milling Cutters for a complete breakdown of all three cutter families.
Returns can only be accepted for unused product in its original packaging. A copy of the original packing slip or invoice is required. For warranty claims please call 1-877-776-9966. See our full return and refund policy.
California Residents Prop 65 Information
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.